What Is The Difference Between Yakima Hitch Pin # Y8880129 And # Y8890176?

Question

Question:

They seem nearly identical. Both for 1-1/4inch hitch receivers. Whats the difference?

asked by: Jase

0

Expert Reply:

Comparing Yakima Hitch Pins for 1-1/4 inch receivers # Y8880129 and # Y8890176, they looked identical to me, so I contacted Yakima and they are in fact identical parts. They just give different numbers to them for some reason, but the diameter, pitch, and length are the same. They both have the 4.28 length, 1/2 inch diameter and 13 pitch.

expert reply by: Jason S

0

Answer 1

The hitch bolt included in the Yakima Replacement Mounting Hardware for SwingDaddy Hitch Mounted Carrier #Y8890185 measures exactly 4.28 inches long with a 1/2 inch diameter and 13 pitch. If you only need the bolt and clip you can use part…

view full answer...

Answer 2

I contacted our representative at Yakima regarding a shorter replacement bolt for the Yakima DoubleDown #Y0424. The replacement bolt part 8820052 was 3-3/4 inches long but is now discontinued. Discontinued part 8820052 has been replaced by Yakima…

view full answer...

Answer 3

The Yakima Threaded Hitch Bolt, part #Y8890200 is 5/8 inch in diameter and a 4-1/4 inch overall length, as shown in the provided photo. The StickUp originally included two different hitch bolts, one for the 2 inch hitch and a shorter one for the…

view full answer...

Answer 4

The Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier, part #Y8890200, is a 5/8 inch bolt and is the same bolt that comes with the part #8890260. The size wrench you would use to install or remove this bolt is 15/16…

view full answer...

Answer 5

Since the lock number of your hitch lock is only listed on the side of the lock core, and yours is locked and therefore not accessible, the only solution is to replace what you have with a new hitch bolt and lock. For that you'd need part…

view full answer...

Answer 6

Yakima produces a number of different 4-bike racks for 2-inch hitch receivers. We do offer replacement threaded hitch bolts to secure them to your receiver tube, but there are several varieties. Most likely you can use part #Y8890176 since this fits…

view full answer...

Answer 7

Hey Ak, thanks for reaching out! The Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack #Y52FR has a 4-5/8" overall length. I've attached a photo of this for your reference. Are you needing to replace the hitch pin…

view full answer...

Answer 8

The bolt that comes with the #Y8890185 is the same as the #Y8890176. The bolt is a 1/2"-13 bolt that is 4.28" long with 2.5" of threads.

view full answer...

Answer 9

Yakima Mounting bolt #Y8890176 is a 1/2 inch bolt, which measures 4-9/16 inches long. This bolt works with the following bike carriers: Yakima FlipSide (Y02426), DoubleDown 2 (Y02423), DoubleDown 4 (Y02424), DoubleDown 5 (Y02425) BigHorn 4 (Y02405),…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

What Is The Difference Between Yakima Hitch Pin # Y8880129 And # Y8890176?

Products Featured in This Question

Continue Researching