Installation of Westin HDX Grille Guard 57-2315 on 2009 Chevy Silverado 2500HD

Question

Question:

Hello, Is the installation of the Westin sportsman grill guard the same for a 2009 as the 2010 shown on the Etrailer youtube video. If not what would be the major difference ?

asked by: Wayne S

0

Expert Reply:

The 2009 and 2010 model years of the Chevy Silverado 2500 are both part of the same 2nd generation of the vehicle so the installation of an item like the Westin HDX Grille Guard # 57-2315 should not differ much, if at all.

expert reply by: Adam R

0

Answer 1

If you have the Westin HDX Grille Guard #57-2315 or the Stainless Steel version #57-2310 for your dad's 2008 Chevy Silverado then the correct mounting hardware kit is part #57-231PK. This will replace all the mounting brackets and hardware so the…

view full answer...

Answer 2

For your 2012 Chevy Silverado 2500, the Westin HDX Grille Guards with Punch Plate that fit your truck are parts #57-3610 and #57-3615; so long as you have one of these specific models, the correct replacement mounting hardware is the following: -…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 10

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Installation of Westin HDX Grille Guard 57-2315 on 2009 Chevy Silverado 2500HD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching