Will The Torflex Lift Kit For A #11 Torsion Axle Fit A #12 Torsion Axle  

The Dexter Torflex Lift Kit #K71-707-02 that you referenced is only confirmed to fit Dexter #10 Torflex axles that have a 2,300 to 4,000 pound capacity. It's possible that it will fit other torsion axles like what you have on your trailer, but it…

Yes, for your 2021 Airstream Globetrotter with tandem Torflex axles the lift kit part #K71-724-02 would be what you'd need to give you the lift of 2-7/8 inches.

You need to use the Torflex Lift Kit #K71-707-02 since your 2020 Haulmark enclosed trailer has the tandem Dexter #10 Torflex axles. The Lippert Axle Riser Kit #LC382741 you found is only rated for Lippert's square torsion axles. While I do see…

Based on the available information for your 2022 Airstream Flying Cloud 30FB it looks like you have Dexter #11 Torflex axles. Assuming that is accurate, you need the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift #K71-724-02. I recommend verifying…

We do have lift kits for trailers with Dexter Torflex Torsion Axles however, I don't have any information on what specific axles your trailer is equipped with so you will need to find out what axle is one your trailer either by calling the…

The RhinoFLEX RV Sewer Hose Extension with Swivel Lug and Bayonet Fittings #CAM39765 and similar items do have removable orange fittings but there are not replacement parts available. If you have the fittings then you just need the hose #CAM39671. If…

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't nose…

The Torflex Lift Kit #K71-725-02 will allow you to add 3-1/8" of lift on your tandem axle trailer with #12 Dexter Torflex axles. Your axle has mounting holes in the side and top of the flange. You will bolt the lift kit to the side of the mount…

We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…

I can definitely help and point you in the right direction. We have a few lift kits available and it will just depend on exactly what kind of axles you have on your camper. The Lift kit #K71-725-02 that you were looking at will #12 Torflex axles with…

The bolt hole spacing on the Torflex Lift Kit #K71-725-02 is 9 inches on center, and 9-1/2' on center. I have attached a photo with these dimensions, as well as a review video for you to check out.

The brackets the fit tip for the #K71-725-02 is referring to is the bracket the axle fits into. I attached a picture that shows the bracket they are talking about.