Recommended 3 Inch Receiver Hitch Pin Lock For 2017 Ford F-250

Question

Question:

I notice the bolt hitch pins fit a maximum of a 2-1/2 receiver but the new trucks for example mine 2017 F250 Super Duty come standard with a 3inch diameter hitch can you get the bolt platform for the larger receivers?

asked by: [email protected]

0

Expert Reply:

I reached out to my contact at Bolt and they don't have any 3 inch hitch receiver pins available yet, but they are working on it. For a lock that is available for your 3 inch receiver on your 2017 Ford F-250, I recommend the Hitch Receiver Lock for 2", 2-1/2", and 3" Hitches # FA86-00-3160.

expert reply by: Jason S

0

Answer 1

Hey William, so the 3 inch hitches do use the larger hitch pin diameter but the 2-1/2 inch hitches still use the smaller one. So with a reducer like the part #38735 technically you would use both sizes. If you check out the picture I attached you can…

view full answer...

Answer 2

To use the TorkLift SuperTruss Hitch Extension 48" Long item #TLE1548 with your 2023 Ford F-350 you are going to want the TorkLift SuperHitch Magnum Trailer Hitch Receiver item #TLF1008-30. This hitch is custom fit and bolts to your F-350 with…

view full answer...

Answer 3

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 4

We do not have a 3 inch extension that is that specific length. The adapter I recommend is the Buyers Products 3" to 2" Receiver Tube Adapter #337RTA302. The adapter is 9-1/2 inches long but it is 3-7/8" inches from pin hole to pin…

view full answer...

Answer 5

Currently the only reducer with a 3/4" hitch pin hole is the 3" to 2" Reducer #38735. This is due to the Reese Super Titan being the only receiver which uses the 3/4" hitch pin hole. All other 3" and 2-1/2" receivers use…

view full answer...

Answer 6

The Reducer Sleeve for Super Titan Hitch Receivers #38735 is the best option for reducing your 3" hitch with the 3/4" hitch pin and use a 2" ball mount. This adapter allows for a trailer weight up to 12,000lbs and 1,200lbs of tongue…

view full answer...

Answer 7

Hey Todd! The replacement for your 1510000140 is the Replacement Control Unit for Kwikee 40 Series Electric RV Steps #LC363985. Any big plans with the Odyssey once you get the stairs up and running again?

view full answer...

Answer 8

Hey Mike, The #IR29FR lock kit is not compatible to work with the B&W Pintle Hitch that you have. The pin diameters are different sizes and would not fit. The only kit we have that is confirmed to fit the B&W Pintle Hitch is the InfiniteRule…

view full answer...

Answer 9

While we don't have replacement parts for a Model 70LP actuator, we do have a great replacement for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You didn't…

view full answer...

Answer 10

The factory brake controller connector on your 2021 Jeep Grand Cherokee is located under the dash behind the hood latch, as shown in the provided photo. Keep in mind, the connector will only be there if the vehicle has the factory tow package which…

view full answer...

Answer 11

I would be happy to help you. For your 2006 Kenworth T300 I recommend the Tekonsha Prodigy P2 Trailer Brake Controller item #90885. This controller ties into the brake stoplight switch that's usually located above the brake pedal, which is what…

view full answer...

Answer 12

Hey Austin, for your 2024 Chevy Silverado 1500 with a factory hitch we really only have a hitch that fits underneath your current hitch with the Curt #C15307 that you referenced. Is there anything wrong with your factory hitch?

view full answer...

Recommended 3 Inch Receiver Hitch Pin Lock For 2017 Ford F-250

Product Page this Question was Asked From

Continue Researching