Using a Roadmaster Blackhawk 2 Tow Bar with a Blue Ox Base Plate Kit

Updated 05/26/2017 | Published 05/25/2017

Products Featured in This Question

Roadmaster BlackHawk 2 Tow Bar Adapter Brackets for Blue Ox Base Plates

(4)

$450.09

Roadmaster Tow Bar Adapter Brackets for Blue Ox Base Plates

(205)

$118.80

Question:

We have one that is almost new. Yesterday either the pin broke or the pin came out When I noticed the truck came out past our motorhome I got off interstate and it had bent the bar badly but was still connected by one side We need a new tow bar The one on your website have a cross bar on truck ours has tubes mounted to truck with a three fingered mount with pin and cotter pin Can you send me a picture of mounts to truck so I can order the correct one

asked by: Jim T

Expert Reply:

It sounds like you're using the Roadmaster Blackhawk 2 # RM-422 with a Blue Ox base plate kit. In which case the tow bar will use adapters, either # RM-031 or # BX88262, to connect.

The picture I've attached shows the Blue Ox connector that mates with a Blue Ox base plate kit.

If this is what you have you can still use your existing adapters with the Blackhawk 2 as long as they aren't damaged as well.

expert reply by: Charles S