Equalizer Weight Distribution System Recommendation for 2017 Rockwood Camper 2280BHESP

Published 05/12/2017

Products Featured in This Question

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW

(840)

$825.00

1-7/8" 12pt Shallow Socket - 3/4" Drive - Chromium-Vanadium Steel

(279)

$19.49

Question:

2014 4runner 18inch hitch height. 2017 Rockwood 2280BHESP 22inch ball height. Looking at the Equalizer WHD, which one, Tongue Weight aprox. TW287 + #150 Trunk = #450.. Need Ball to be higher than vehicle hitch to have trailer level. 2inch ball Sag Height with cargo and trailer 2inch in vehicle currently.

asked by: Patrick

Helpful Expert Reply:

We have just what you'll need but let's start with the weight distribution system. You gave the exact right figure for picking out a WD system since it's based off the loaded tongue weight plus weight of any cargo behind rear axle. So you are looking at a kit for a 450 lb tongue weight.

So for that you would want the part # EQ37060ET which includes a shank. With the shank in the rise position you will be able to easily attain the 4 inches of rise you need.

You'll need a thin walled socket too to install the ball. For that you would want the part # ALL643216.

expert reply by: Jameson C