Recommended Erickson E-Track System for Transporting Motorcycle in Enclosed Trailer
Updated 05/04/2017 | Published 05/03/2017 >
Products Featured in This Question
Question:
I have a 6x12 enclosed trailer and am going to use it to haul a motorcycle and several other things. Pervious I had a 5x10 trailer and used a wheel chock and 4 recessed D-Rings to hold the motorcycle in place. Now, I think the e-track is a better way to go for the new trailer. I think the 8 ft sections are best, but I cant decide if itll be best to mount them on the far edges of the inside or move them in 1-2 ft from the walls. I guess I am looking for some advise. thoughts? I also wonder if I even need the full 8 ft it would be nice to have versatility in the future.
asked by: Ryan
Expert Reply:
Installing the Erickson Horizontal E-Track # E19148 in your enclosed trailer is an excellent idea. Along with securing your motorcycle into place, the E-Tracks will provide great versatility to tie down various other cargo items in your trailer.
For your motorcycle, I recommend installing the tracks on either side of the motorcycle to provide multiple tie-down points in order to keep it secure. Then you can use the Erickson E-Track Tie Down Rings # 59131 along with D-Ring Straps # E59143 to secure everything down.
As long as there is adequate support, you can really install the E-Track anywhere in your trailer. and it may ultimately depend on personal preference and what other items you may use the E-Track system for in the future. I do recommend finding a location with the most support, such as over a horizontal support structure that runs the length of the trailer.
I agree with you regarding going with the longer sections of E-Track as long as you have the space available. As you mentioned, this is simply going to give you added versatility down the line for additional, easy tie-down points for various cargo items.
I have attached a few demonstration videos on the products mentioned in this answer for you to check out.
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E Track
- E Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Are There Long-Term Service Contracts To Use PingMaster Trailer Tracking Devices?
- Q&A: How Many Additional Panels Can Be Added To The Rich Solar RV Solar Charging Kit RS37VR
- Q&A: Is E-track Stronger Than X-track, Is There An Advantage Of One Over The Other
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Mounting Suggestion For E-track To Aluminum Utility Trailer
- Q&A: Mounting E-Track for Hauling Motorcycle on 8 x 5 Trailer
- Q&A: Mounting Width Required for Thule AirScreen 52 Inch Fairing
- Q&A: Solution for Roof Fairing on Vehicle w Rail Grab Roof Rack Where Theres Gap Between Roof/Fairing
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Hand Winches
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Trailer Wiring Diagrams




