bing tracking image
  1. Work Lights
  2. Optronics
  3. LED Light
  4. Exterior Lights
  5. Pedestal Mount
  6. Square
Opti-Brite LED Work Light - Flood Beam - 617 Lumens - Black Aluminum - Square - Qty 1
Special Savings on Select Optronics Opti-Brite Work Lights.
Optronics

Opti-Brite LED Work Light - Flood Beam - 617 Lumens - Black Aluminum - Square - Qty 1

Part Number: TLL48FB
In Stock
$37.99
Retail:$57.54
You Save: 34%
Work Lights
Add to cart
Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
4-1/8" x 4-1/8" LED utility light produces a bright white light. Flood beam illuminates a wide area. Black powder coated aluminum housing is rustproof. Impact-resistant polycarbonate lens. Pedestal mount with included hardware. 6 Diodes. Great Prices for the best work lights from Optronics. Opti-Brite LED Work Light - Flood Beam - 617 Lumens - Black Aluminum - Square - Qty 1 part number TLL48FB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (100)
  • Q & A (0)
  • Photos

Optronics Work Lights - TLL48FB

  • LED Light
  • Exterior Lights
  • Pedestal Mount
  • Square
  • Flood Lights
  • Work Lights
  • White
  • Flood Beam
  • Optronics

4-1/8" x 4-1/8" LED utility light produces a bright white light. Flood beam illuminates a wide area. Black powder coated aluminum housing is rustproof. Impact-resistant polycarbonate lens. Pedestal mount with included hardware. 6 Diodes.


Features:

  • Square work light provides bright white light for industrial, agricultural, and recreational applications
  • Flood beam illuminates a wide area
  • Durable surface-mount technology (SMT) construction of LED circuit board
    • Better withstands shock and vibration
    • Allows for improved heat distribution
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable, water-resistant construction
    • Black powder coated, die-cast aluminum housing is durable and rustproof
    • Tough polycarbonate lens is impact resistant
    • IP69K rated - stands up to severe environmental conditions and cleaning methods
  • Compatible with 12V DC and 24V DC systems
  • Easy installation
    • Single-bolt, pedestal-style bracket and hardware included for installation
    • Adjustable bracket lets you adjust the angle of the light as needed
    • Stainless steel construction resists corrosion
  • 10" Long, 14-gauge power lead and ground wire


Specs:

  • Quantity: 1 light
  • Light Output:
    • Effective lumen output: 617 lumens
    • Raw lumen output: 1,200 lumens
  • Diodes: 6
  • Overall dimensions: 4-1/8" wide x 6-3/8" tall x 2-1/8" deep
    • Light dimensions: 4-1/8" wide x 4-1/8" tall
  • Lead wire length: 10"
  • Power draw:
    • At 12.8V: 1.52 amps
    • At 24V: 0.65 amps
  • Lifetime warranty on LEDs


Optronics OptiBrite LED TLL48 Series Work Light Diagram

Raw Lumens vs. Effective Lumens

Lumens are used to measure the amount of usable light that is put out by a light source. Raw lumens represent the number of lumens that the manufacturer claims the LEDs are capable of producing. It does not include the light's drive method or the amount of light lost from the lens or reflector. Effective lumens take these factors into account and represent the number of lumens that are actually produced by the complete light assembly, not just the amount of light that the diodes are capable of producing. This light has a 1,200 raw lumen capacity and produces 617 effective lumens.


Flood Beam Projection Angle and Light Density Information

Optronics TLL48 Series Opti Brite LED Work Light Beam Pattern and Projection Angle Diagram



TLL48FB Optronics OptiBrite LED Square Utility and Work Floodlight - Black Housing - Flood Beam - 6 Diodes - 1,200 Raw Lumens - 4-1/8" x 4-1/8"




California residents: click here



Customer Reviews

Opti-Brite LED Work Light - Flood Beam - 617 Lumens - Black Aluminum - Square - Qty 1 - TLL48FB

Average Customer Rating:  4.8 out of 5 stars   (100 Customer Reviews)

4-1/8" x 4-1/8" LED utility light produces a bright white light. Flood beam illuminates a wide area. Black powder coated aluminum housing is rustproof. Impact-resistant polycarbonate lens. Pedestal mount with included hardware. 6 Diodes.

by:

I already owned this particular brand of LED light so I pretty much knew what I was getting. In my usage they have been better than average. No problems to speak of. I use them on all of our trucks.



by:



by:



by:



by:

I installed these on the back of my boat trailer and hooked them up to my reverse lights for launching my boat in the dark. I wanted an extremely bright flood so I could see both sides and the down the center. Just wonderfully bright and dependable a year later as when new.



by:

Appears to be a well made outdoor quality light fixture with good quality mounting/attaching hardware thoughtfully included by the manufacturer. Rated for both 12 and 24 volt applications. Flood beam provides good general work area lighting with low current draw. We plan to use them predominantly for quick and easy portable indoor lighting during power failures.



by:

Excellent replacement light for my trailer. Had to upgrade lights on my 16 year old horse trailer. Chose LED and am greatly pleased with this light. Has stood the test of time.



by:

I replaced a halogen external light fixture on my horse trailer with this model LED light fixture several months ago. It is brighter, instant on and lower energy usage which are all positives especially for the battery when the trailer is disconnected. I ordered 2 more to replace the other external halogen light fixtures on my horse trailer. Good lighting is especially important when you need to access your trailer with your horse after sundown. Also easy to install.



by:

RECEIVED THE PRODUCT WITHIN THE TIMEFRAME STATED AND THEY ARE EXACTLY WHAT I WANTED.



by:

Great quality, reasonable priced, and great service from the folks at etrailer



by:

Very well built light. Easy to install and lights up a large area. I would buy again and recommend it.



by:

I ordered two of these for headlights on a 36 volt electric golf cart. These things are brighter than a lot of car headlights and have great range. If i ever need anymore for back up lights or work lights on my truck i will be ordering these. I have been using them for over a year and they still work great. I have been ordering from etrailer for about 5 years now and let me tell you there is no better company or staff to deal with.



by:

I've been using this light on the back of my enclosed trailer. I just couldn't see behind me at night. This light is amazing for lighting up behind the trailer, all from one light. Definitely recommend!



by:

Easy installation , we replaced three lights on our bloomer horse trailer . These are much much brighter than the old lights very nice product so far ! Thank you



by:

Look great and are bright but not blinding. Can look out windows and see now.



by:

I bought the earlier version of this light several years ago to replace an incandescent work light on our horse trailer. It worked brilliantly until I pressure washed it. (Note to self: Don't pressure wash the work light!) I purchased the Opti-Brite LED Work light to replace the one I drowned. This one also works brilliantly! It has an improved mount as well as being even easier to install. I highly recommend it!



by:

Good product, very bright with low amperage. Bought these for my horse trailer to replace my prep area and ramp load area lights.

Install is easy but on horse trailers where just the thin steel sheet is used, the square backing of the bolt protrudes through the bracket and won't tighten fully, leaving some wobble and play that is not acceptable for horse trailer exterior. a thick lag bolt washer did the trick.

Also, for an 'area' light, this is not the most ideal. it's extremely bright but a tighter beam than i would have liked. Meaning, mounted 8 feet off the ground, there is a very tight 5 feet long by 2 or 3 feet wide strip of really bright, around the saddle on our horse. i was expecting something like a 7 x 5 or more given the shape of the light. picked based on lumens, but beam angle was not presented. would be good info.

Overall 4 stars, really just because of the narrow beam.



by:

I purchased the lights to replace the headlights on our forklift because I was tired of replacing bulbs every couple of weeks, but once they were on we realized how much better the LED lights are. They light up the whole area in front of the lift and no more replacing bulbs. Great product at a great price.



by:

Good quality, very bright



by:

Could be a tad brighter, but have it on a remote switch on the back of my cargo trailer from my truck and aids in backup and lighting when loading my trailer at night. Great product!



by:

The best light to use when it's dark! I used these lights on my off-road camping trailer and they work! It was dark at night and this can be a real problem, so I installed these lights and I could see at night. Super great price for an inexpensive solution. The mounts are real simple with a nut and bolt for the up and down and a carriage bolt and nut for mounting. Easy!



by:

still working after one year on open car trailer very happy



by:

etrailer had everything I was looking for. Their easy search lists are great for looking for specific items. I found trim for my pop up camper door that I have been searching for every where. All ordered items were exactly what I need. Service was very helpful in finding the correct items. Delivery was fast.
Thanks



by:

Installed the lights and they work very good. They arrived quickly also. I have ordered other items in the past, all good products and good service.



by:

I have used both the aluminum model and the plastic housing models on our work trailers . I prefer the plastic housing light due to the rough roads. The lighter weigh light causes less stress on the mounting points. Good product and etrailer is good on communicating with customers.


25
100
Show More Reviews

See what our Experts say about this Optronics Work Lights

  • Wiring in an LED Work Light and Switch to a Trailers Running Light Circuit
    You could certainly use Opti-Brite LED work light # TLL48FB on your horse trailer and put it on a switch but having it wired into the running light circuit could have some unintended issues. Specifically, if you forgot to turn the switch off and drove away with the light still on you would blind driver's behind you! If the trailer has a battery I recommend wiring the light to it directly via a switch. But if you want to go ahead and wire it in line with the running lights then all you...
    view full answer...
  • Interior LED Lights for a 7 x 22 Foot Area in an Enclosed Horse Trailer
    Six of the RV LED interior light # ILL31CB should provide adequate light for your trailer. More so than the incandescent bulbs in # 30-76-243. What I recommend though is to go with the LED 24 diode light # ILL24CB. The additional diodes will provide even more light than the 10 diodes in the light you referenced. I have linked a video review for you. The other option is to go with an LED flood light like # TLL48FB which has a 1200 lumen rating which would be like a vehicles headlights...
    view full answer...
  • Can The Optronics Opti-Brite LED Work Light TLL48FB Be Run Off The 12v Power On A 7 Way Plug
    With the Opti-Brite LED Work Light - Flood Beam - 617 Lumens # TLL48FB having only a 1.52 amp draw, there will be absolutely no issue running these off the power provided from a 7 Way plug. We have actually had people wire these directly to reverse light circuits on their trailer to illuminate a wide area behind them, making backing up a lot easier.
    view full answer...
  • Can Opti-Brite LED Floodlight be Grounded to a Steel Trailer Frame
    Yes, you can ground the Opti-Brite LED Floodlight # TLL48FB to the steel frame of a trailer. Just make sure the grounding location is free of paint, dirt, and corrosion.
    view full answer...
  • Is Fuse Protection Needed When Installing Opti Brite LED # TLL48FB As Trailer Reverse Light
    You don't even really need a fuse to wire up two of the Opti-Brite LED Work Light # TLL48FB as reverse lights. The draw of these is so small at 1.52 inches you aren't going to have to worry about overdrawing the circuit either. Just mount the lights where you want them, ground the white wire, and then run like a 14 gauge wire to the black wire of the assembly from the center pin of your 7-way and you'd be good.
    view full answer...
    Image 1 for
  • Recommended 12-Volt Powered Light and Cord for Trailer During Loading and Unloading
    I can help you pick out a work light for loading/unloading and help you wire it up to use in a 12-volt outlet. First, I would instead recommend the # TLL48FB Opti-Brite LED Work Light from Optronics instead of the light # TLL50FB you were looking at. This light is much brighter and has a better spread with 1,200 raw lumens of light compared to the 324 raw lumens of light produced by the # TLL50FB. I have linked two images of us testing the two lights at night outside, and you will be...
    view full answer...
    Image 1 for Image 2 for
  • Recommendation for Utility/Work Lights Installed in Toolbox to Light Rear of Truck
    I have several lighting options for you, but a trailer reverse light, like # BUL52CB that you mentioned, is not going to provide you with the light you are looking for. To provide you with light at least 8 feet away, I recommend going with a utility/work light. For mounting flush inside the toolbox as you mentioned, the best option will be the Vision X LED Light Strip # XIL-SL12. This light has an effective lumen output of 300 lumens and is 12 inches long x 1 inch wide x 1/2 inch deep....
    view full answer...
  • Reverse or Utility Lights to See When Backing Up Cargo Trailer
    If your trailer has a 7-Way connector and the vehicle side has the center pin active when the vehicle is in reverse then you can install backup lights on the trailer and wire them to the center pin. You can use 2 of backup light # BUL12CB 2 of grommet # a70gb 2 of bracket # BK70BB And 2 of pigtail # A49PB If you do not have a 7-Way but just a 4-Way instead you could wire a utility light such as # TLL48FB in with the running light wire on the trailer and have the utility light run on a...
    view full answer...

Do you have a question about this Work Light?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Tricia G
Updated by:
Tricia G
Employee Amy B
Updated by:
Amy B
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.