Trailer Hub Seal Recommendation for Al KO 2,200 lb Axle

Question

Question:

AL-KO number 15192TC Cross ref Dexter 010-231-00

asked by: Lawrence

0

Expert Reply:

The seal set you need is the part # RG06-020 which is a confirmed fit as a replacement for what you have.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hello Eric, thanks for reaching out. We do have a seal that matches the OD you need, the Double Lip Grease Seal #RG06-010, but this has a 1.249" ID. I am sorry to say we don't have anything with a 1.219" ID. Our records show the 12192TB…

view full answer...

Answer 2

Hey Silas, We should be able to get you some bearings for your AL-KO axle, though I was unable to find any type of reference to 363627. That's okay though because you can still find the right ones, but you'll need to use a digital caliper and…

view full answer...

Answer 3

Hey Gary, yes your cats will hear the sound that the MouseBlocker PROx Electronic Rodent Deterrent - 12V DC #MB94FR emits. This puts out a sound range of 25 to 45 kHz while a cat can hear that and much higher. They probably won't love it but you…

view full answer...

Answer 4

Hi Thomas; it looks like the old 568861 has an inner diameter of 1.719" and outer diameter of 2.565". I recommend measuring yours just to be sure. Assuming that is correct, you can use the #RG06-050 which is a pair of seals that share the…

view full answer...

Answer 5

Based on the number and dimensions you listed the correct grease seal you need is the part #RG06-020 as this cross references to what you have and matches the dimensions.

view full answer...

Answer 6

Having the same inner and outer races may indicate that the inner and outer bearings on your trailer are also the same, but it is not a guarantee. This is because some races are designed to fit multiple bearing sizes, as the race will go on the…

view full answer...

Answer 7

Yes, I contacted a Tech at Dexter Axle for verification and the Dexter Axle UFP Idler Hub, #DA54FR is confirmed to be a replacement for the Reliable Brand, Model BT-150A “short” hub on 2,100 lb. axles. The inner & outer races are included but not…

view full answer...

Answer 8

The size seal you will need will depend on the part number of your inner bearing. If the outer bearing part number is L44649 and the inner bearing part number is also L44649, then you will use a TruRyde Seals, #RG06-020. If the outer bearing part…

view full answer...

Answer 9

We don't have a database showing what replacement parts are needed for different trailers according to VIN or year/make/model but if you can let me know what the weight capacity is for your axle I can give you a guesstimate as to what you'll…

view full answer...

Answer 10

Hey Jon, The open side of the Grease Seals #RG06-020 are going to sit against the face of the bearing so you likely wouldn't have an issue with the seal pressing on the bearing and preventing it from spinning, but you'll have less of an air…

view full answer...

Answer 11

Ideally, you want the grease seal flush with the inside lip of the hub but as long as the seal itself is riding on the proper spot on the spindle. If the seal has been pushed in too far to ride along the proper shoulder on the spindle, we offer the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Trailer Hub Seal Recommendation for Al KO 2,200 lb Axle

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching