Reese Sidewinder RP34FR Measurements To Center Of First Bolt Hole On Turret
Updated 04/21/2017 | Published 04/20/2017
Question:
Hi, can you please give the measurement between the bottom of the arm and the center of the first bolt hole on the turret.Thanks.Reese Sidewinder RP34FR
asked by: Roy H
0
Expert Reply:
The Reese Sidewinder 5th Wheel King Pin with Rotating Turret - 16,000 lbs # RP34FR has a measurement between the bottom the turret to center of first bolt hole of 5 inches. It has a measurement of 8-1/2 inches from the bottom of the extention arm to the center of the first bolt hole. I've attached a photo to assist.
expert reply by:
Jason S
0
click to enlarge
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Sidewinder Wedge for Curt A Series 5th Wheel Trailer Hitches
- Q&A: Can Sliding 5th Wheel Hitch be Used with Reese Sidewinder Pin Box
- Q&A: Recommended In Bed 7-Way Connector for a 2023 Ram 2500
- Q&A: Will Fixed Fifth Wheel Hitch Fit Factory Pucks of Short Bed 2020 Chevy Silverado 2500
- Q&A: Correct Pin Box to Replace a Turning Point
- Q&A: Troubleshooting A Lippert Turning Point That Won't Pivot Freely
- Q&A: Maintenance Schedule for Lippert Turning Point Pin Box
- Q&A: What is the Difference Between the B&W RVK3300 vs RVK3305