Available Mounting Hardware for a Thule Atlantis 2100 Cargo box

Question

Question:

I have an Atlantis 2100 Thule box with rusted out mount brackets. The video says your part will work for Atlantis all models but the note on the product does not mention the 2100. So, will this part work with the 2100. Thanks.

asked by: Jon C

0

Expert Reply:

The Replacement Quick Grip Mount Assembly, # TH05738, are confirmed to work with the Thule Atlantis 2100 Cargo Box.

If you need cradles as well you would need the part # TH8523387001.

expert reply by: Jared P

0

Answer 1

I contacted our representative at Thule and she verified that the Replacement Quick Grip Mount Assembly, part #TH05738, is the correct replacement hardware for your Thule Atlantis 2100 Roof Cargo Box. If you need cradles as well you would need the…

view full answer...

Answer 2

Installing a replacement hinge or strut on your Thule rooftop cargo box isn't complicated, but it does take some force. I have added a link to a video showing how to do this, and you can forward to about the 1:30 part to get to the nitty gritty.…

view full answer...

Answer 3

I do not have a specific set of instructions for the Thule QM3 Quick On-Off Mounting Hardware Kit, item #TH04997, but I did come up with a drawing, see attached, that shows exactly how the parts of the kit install.

view full answer...

Answer 4

Yes, I checked with Thule and the correct replacement mounting hardware for your Thule Evolution 2100 cargo box is the Easy Snap U-bolt #43216.

view full answer...

Answer 5

Yes, technically you can remove the lid of this Yakima RocketBox Pro 14 Rooftop Cargo Box 14ft, part #Y07192, but I do not recommend it. The box has a simple ball and socket joint that you will have to disengage to remove the lid. Once the lid has…

view full answer...

Answer 6

To replace the mounting hardware that came with your Thule Atlantis 2100 roof cargo box you need the following parts: - Quick Grip Mount Assembly #TH05738 - Slide Strip #TH05401 - Snapfit Cradle Replacement Kit #TH68NB The Quick Grip and Slide Strip…

view full answer...

Answer 7

The key number for the lock core on your (discontinued) Thule Atlantis 2100 box should be stamped on the front of the cylinder itself. If you check out the attached picture you can see the "N030" number for lock core part #THLOCKN030. If…

view full answer...

Answer 8

Hi Johnny; the key shield can be replaced using the #05771. To replace the lock cylinder you can use the #TH450200.

view full answer...

Answer 9

I contacted our representative at Thule and she verified that the Replacement Quick Grip Mount Assembly, part #TH05738, is the correct replacement hardware for your Thule Atlantis 2100 Roof Cargo Box. The Replacement Quick Grip Mount Assembly, part…

view full answer...

Answer 10

The piece you're speaking of is what Thule refers to as an AcuTight cradle. It isn't included with the #TH94JV fast grip clamp, but is available separately as part #TH8523387001. I've linked to product description videos for the…

view full answer...

Answer 11

Yes, the Acutight Replacement Cradle #TH8523387001 that you referenced would be the correct replacement cradle for your Thule Spirit Cargo Box 1600XT because this box uses the AcuTight installation hardware. This cradle also fits the last generation…

view full answer...

Answer 12

I can confirm that the Thule Snapfit Cradle Replacement Kit item #TH68NB is the correct replacement part. It fits all of Thule's roof mounted cargo boxes no matter what model. I confirmed this information with Thule. This kit will replace all…

view full answer...

Available Mounting Hardware for a Thule Atlantis 2100 Cargo box

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching