Thule Evolution 2100 Replacement Mounting Hardware Recommendation

Question

Question:

Will the Easy Snap Mounting Hardware work on the Thule Evolution 2100? Ive just seen the 1600 and 1800 referenced in the Q and As.

asked by: Jim

0

Expert Reply:

Yes, I checked with Thule and the correct replacement mounting hardware for your Thule Evolution 2100 cargo box is the Easy Snap U-bolt # 43216.

expert reply by: Jameson C

0

Answer 1

We have the correct replacement mounting hardware for your Thule Evolution Cargo Box, but the QM3 #TH04997 is not the correct hardware kit unless your holes are 4 inches on center at the mounting locations. To replace the mounting hardware for your…

view full answer...

Answer 2

We do have replacement hardware for the Thule Evolution 1200 cargo box, but #CTC-18PARTS is not the correct part. The actual replacement hardware kit for the Thule Evolution 1200 is the Thule EasySnap Mounting Kit #TH05820 .

view full answer...

Answer 3

I do not have a specific set of instructions for the Thule QM3 Quick On-Off Mounting Hardware Kit, item #TH04997, but I did come up with a drawing, see attached, that shows exactly how the parts of the kit install.

view full answer...

Answer 4

The Replacement Quick Grip Mount Assembly, #TH05738, are confirmed to work with the Thule Atlantis 2100 Cargo Box. If you need cradles as well you would need the part #TH8523387001.

view full answer...

Answer 5

Installing a replacement hinge or strut on your Thule rooftop cargo box isn't complicated, but it does take some force. I have added a link to a video showing how to do this, and you can forward to about the 1:30 part to get to the nitty gritty.…

view full answer...

Answer 6

Yes, technically you can remove the lid of this Yakima RocketBox Pro 14 Rooftop Cargo Box 14ft, part #Y07192, but I do not recommend it. The box has a simple ball and socket joint that you will have to disengage to remove the lid. Once the lid has…

view full answer...

Answer 7

If you have the original Thule Mountaineer cargo box, number 669 and not 669ES or 669TT, then there is no replacement lock or bracket for the housing available. For the 669ES and 669TT you would use the universal change key #853-1251 which is…

view full answer...

Answer 8

We can help you out with that, Anthony. We do indeed carry that part. You'd want the Thule replacement lock cylinder, part #THLOCKN019. You'll need the change key, part #853-1251 to remove the existing lock cylinder.

view full answer...

Answer 9

If you are willing to make modifications to your Evolution cargo box, you could use the Quick Grip mounts, #TH05738. You would also need the proper cradles, #TH8523387001. There is no kit available to retro fit older boxes with these mounts. It would…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Thule Evolution 2100 Replacement Mounting Hardware Recommendation

Featured Help Information

Miscellaneous Media

Continue Researching