Recommended Trailer Wiring For 2011 Honda Pilot

Question

Question:

I have a 2011 Honda Pilot that came with the from the factory but no trailer light hook up. Which trailer light kit would i need to purchase to fit this application as the 2 options for with tow package or without tow package are dramatically different

asked by: Garry

0

Expert Reply:

You are correct there are dramatic differences in the trailer wiring for your 2011 Pilot. I called my contact at Tekonsha and asked about your vehicle.

If you are wanting a 4-way trailer connector on your Pilot you can use part # 118491. There is no cutting or splicing into the wiring on your vehicle.

If you want a 7-way trailer connector on your Honda you can use part # 118253.

expert reply by: Jeffrey L

0

Joseph N.

6/15/2020

Hooked it up and nothing worked. No electric at the plug. Really put me in a bind. Had to attach flashlights to the trailer .

Chris R.

6/19/2020

Did you check to make sure all the fuses and relays were securely attached? Other than a bad box (which would be really rare for a brand new harness) this is the only reason I can think of that would prevent any power from reaching the 4-Way.

Joseph N.

6/21/2020

@ChrisR I got it to work. Seems some chipmunks chewed on some wires underneath. I had to splice wires and use connectors to get it to work. All is good. Pulled the trailer 1100 miles in two days. Thanks.

Answer 1

It sounds as if there may be a blown taillight fuse or you may have one of the fuses or a relay installed in the wrong position on your 2009 Honda Pilot, after installing the #118491 T-One connector. I would start out checking the taillight fuses in…

view full answer...

Answer 2

Hey Gary, the best 4-way kit that fits your 2011 Honda Pilot is the Tekonsha part #118491 as it has the easiest install and most reliable converter box. We don't have an install video for this or any of the wiring kits that fit your vehicle but I…

view full answer...

Answer 3

I recommend the Tow Ready T-One Wiring Harness, #118491. This harness will give you a 4-way flat trailer connector on the rear of your 2009 Honda Pilot and have all the correct fuses and relays to activate your tow package wiring. I am sending a link…

view full answer...

Answer 4

The Curt 2 to 3 Wire Tail Light Converter #C56196 is definitely designed to separate out the light functions like you're wanting (Curt claims it won't work with LED lights but that's been debatable) but I do see the problem with your…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Recommended Trailer Wiring For 2011 Honda Pilot

Continue Researching