Tarp That Can Be Used For 2013 Chevrolet Silverado 8-Ft Truck Bed

Question

Question:

Do you sell an 8foot box cover I bought the cab cover now looking for box cover

asked by: Terry R

0

Expert Reply:

We do have covers that would work for your 8-ft bed but they are not water repellent like the # RA1330 cover for the cab is.

You may want to check out part # EM57056. This is a 6-ft x 8-ft mesh tarp that protects the truck bed from dirt and the sun's UV rays.

expert reply by: Jeffrey L

0

Answer 1

Unstretched the width of the Erickson Mesh Tarp and Truck Bed Cover #EM57056 is only 66 inches. But since the tarp has a bit of stretch it can easily fit to the dimensions you listed.

view full answer...

Answer 2

The Erickson Heavy-Duty Retractable Anchors, part #EM01003, are listed as a fit for the 2013 Chevy Silverado. Check out the attached photos of the dimensions of the anchors that shows they will fit the stake pockets of your Silverado. I have also…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…

view full answer...

Answer 6

Hey Tim, I checked out your Predator 5000 generator and it does use a quick connect propane connector like what the part #CAM57629 provides so yes this would work. How do you like the Predator generator?

view full answer...

Answer 7

The brake wire providing voltage is wired in parallel, with one lead from each magnet being grounded to the trailer frame. We have a great Wiring Help Page that shows a diagram, I will provide a link to it below.

view full answer...

Answer 8

The biggest difference will be capacity. The Curt Hitch part #C15302 that you referenced is on the high end of the capacity spectrum. It's a Class V hitch that has the following capacities: Maximum gross trailer weight: 16,000 lbs Maximum GTW…

view full answer...

Answer 9

We do have an option for replacing your Elixir ELX-60. Unfortunately there is not going to be a direct replacement for the converter section. You will need to replace the entire panel with the Progressive Dynamics 4500 Series RV Converter…

view full answer...

Answer 10

Even on manufactured trailers wiring colors can vary so there is no way to say for sure. The only way to know which wire is tied to which function is to trace the wire back. On an SAE standard 7-way the brown wire would be the tail/running lights. On…

view full answer...

Answer 11

Hey Justin, the cab style actually doesn't factor with hitches like the Curt part #13322 so yes it will fit all cab styles of the 2012 Chevy Silverado 1500. This is full list of trucks this hitch fits: 1999 - 2013 GMC Sierra 1500 1999 - 2004 GMC…

view full answer...

Answer 12

You should be getting 12 volts on the running light circuit when the running lights are turned on. If not, the problem is either in the connector or upstream from there. The first thing you should check is the trailer connector on your towing…

view full answer...

Tarp That Can Be Used For 2013 Chevrolet Silverado 8-Ft Truck Bed

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching