Rack-Mountable Cargo Tray Options for Installation on Round Yakima Crossbars

Question

Question:

I have a 12 Subaru Outback but using the Yakima towers and round crossbars. I really wants a platform style rack like the pioneer platform. Can I mount this to the round crossbars?

asked by: Ernesto

0

Expert Reply:

The Rhino-Rack Pioneer Platform Cargo Rack # RR75TB with Gutter Mount Legs # RL110S2 and spacers # LHSPAIR isn't a system intended for installation on an aftermarket roof rack but we do have rack-mountable options for you. The linked page will show you all cargo baskets and cargo trays that will mount nicely on your round Yakima crossbars.

The options include the Rhino-Rack Steel Cargo Basket # RMCB which measures 47-3/16" long and 35-3/8" wide, and the similar sized Pioneer Platform carrier # RR42114BF.

expert reply by: Adam R

0

Answer 1

I would not recommend going with the Rhino-Rack Roof Rack Legs #RRRL110S5-2 over the #RRRL150GMC-2. While both are gutter mount options, the #RRRL150GMC-2 have been confirmed to fit and provide the proper roof clearance for adding crossbars to your…

view full answer...

Answer 2

Roof rack options for your 2014 Chevrolet Express Van with rain gutters are displayed on the linked page and these include products from Inno, Rhino-Rack and Thule. As you review the rack systems you will notice that their weight ratings vary…

view full answer...

Answer 3

Although the Thule system you referenced would work well, in my opinion the clamp system used by the Rhino Rack Roof Rack is a bit more substantial, and would get a better grip on the rain rain gutter. You can install a Rhino Rack Roof Rack by using…

view full answer...

Answer 4

For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 #RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long…

view full answer...

Answer 5

Hello Christina. The 60" Inno Square Crossbars #INB165 you mentioned may work for you. These will only work with the Inno square bar towers, or the old-style Thule square bar towers. So as long as this is what you have they will work great. The…

view full answer...

Answer 6

The Inno Square Crossbars part #INB165 and the Thule Square Load Bars part THLB65 are both 65" long x 1-1/4" wide x 7/8" tall so yes, they should work in place of one another just fine.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey John, we'd be glad to help you pick out the best lift assisted kayak carrier for your 2026 Subaru Outback Wagon! I think the Thule Hullavator part #TH898 would be your best option as it is a little easier to use and load so that's what I…

view full answer...

Answer 11

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Rack-Mountable Cargo Tray Options for Installation on Round Yakima Crossbars

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching