These 4-5/16" tall roof-rack legs are designed to mount on your vehicle's factory rain gutters with included brackets and hardware. The legs work with 1 Rhino-Rack Heavy-Duty or Sportz crossbar. Security bolts included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. It's Evangeline here at etrailer and today we'll be taking a look at our Rhino-Rack Gutter Mount Legs which are 8 1/4 inches tall here at etrailer. So these are going to be ideal If you have a Jeep, if you have a van, if you have a vehicle with either factory mounted gutters or if you install those gutters yourself but you also want a way to build or make a Rhino-Rack system. So these are your slightly taller than average gutter mount legs and that's gonna be ideal if you need a little extra height or clearance. Maybe you're carrying around skis with extra large bindings and you need that clearance underneath. Or maybe the way you have your gutters mounted is a little bit below the roof level compared to other vehicles.
Whatever situation you're in, let's see if this video will help you out with figuring if these are the right legs for you. So the towers themselves are made of nylon so that is a little bit more lightweight than let's say the steel towers you would see on your more traditional, let's say naked roof towers or the ones that clamp onto your roof. So this nylon again is lightweight but it's also UV resistant. So as you have this on your roof, as you have this on your gutter, it is gonna be exposed to the elements. It is going to be exposed to the sun and that's where their UV resistance comes in handy because you don't want it deteriorating underneath the sunlight.
With this being lightweight though, there is a glass reinforcement on the inside and that adds to its weight capacity as well as its durability. So the actual height measurement of this is going to be 8 1/4 inches tall. So that height is going to be from the channel of your gutter to right where your crossbar is attached. So it's not the total height but the usable height of your tower. So from there, you can then estimate from the underneath your crossbar, whether it be your Vortex crossbar or your square crossbar, that's gonna be the clearance you have from your roof to your crossbar.
So measure your own gutter mount or your own channel to see if this will work with your vehicle. Now, this is not using lock and key to secure it. What it does use is its own hex tool or hex key. It has its own special shape from Rhino-Rack and this is what is used to either tighten down or loosen the bolts holding the clamp into place. So if someone does not have this special hex tool, they won't be able to undo it.
So not the same as having your own key and your own lock keyed to or keyed to itself but it's still a form of security measure. Now the install process is really simple for these. All you need is a gutter to mount these towers to. You need the kit itself, you need your crossbars and you need some tools. So my final thoughts about these gutter mounts is that they give you a pretty decent height or clearance above your roof. So whether you have certain vehicles where you need access to the sunroof and you're worried about those really low profile bars that don't give you enough, if you have, let's say cargo or items that you are carrying that require a little bit more clearance like your skis with large bindings. Or if you have, let's say a solar panel on top of your roof and you just wanna get above that, this might be a great option for you. If you're just using a roof rack as a roof rack and you're not concerned about clearance but maybe a little bit more about looks, check out our recommended fit for your vehicle. Those are usually a little bit more low profile, look a little bit more factory like. They'll give you as much clearance but again, there's pros and cons, it does depend on you and your situation but I hope this video helped you out with that decision making. And that was a look here at our Rhino-Rack Gutter Mounted Legs which are 8 1/4 inches tall here at etrailer. My name is Evangeline and I hope this helps you out. Enjoy the journey..
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
Ratings & Reviews
It didn’t feel secure on the rain gutters of the Jeep as the tightening mechanism forced the clamps to move outward from the gutters. I used it only a couple of times. Wouldn’t recommend.
If you have a sky-onetouch jeep is this exactly the height you need. Works perfectly with a cargo box, and sometimes just camping gear spanning the aerobars. The clamps do not damage the gutter in anyway, not even a scratch...And I'm a notorious over-tightener. Highly recommend.
My vehicle was a Jeep Gladiator. The feet worked, but the part that clamps to the gutter could be improved. The clamps pull at an angle to the gutter instead of flat. They had a tendency to pull out. They needed adjustment, in my opinion, as I thought they could work themselves off. I had an aero bar and kayak carriers attached to the feet.
Perfect for the sky one touch. You can open the top up with no issues.
We have been very happy with our Rhino Rack system atop our 2018 Chevy Express Van. We carry 2 Kayaks ( sit in style, 14 ft and 12 ft) upside down on the van roof and use some eye bolts and load stops with ratchet straps to hold them in place.
It took a while to get them( due to being out of stock) but ETrailer has excellent customer service and kept in touch with us on the order status until they arrived.
Wish they would fit better. Always worried they will fall off. They are tight but wish i went with the Thule. The rhino crossbars that i purchased to go with it whistle bad at high speeds.
Easy to install. Seem to be sturdy and well made.
I think it just looks good first of all. I can carry my paddle boards and still use my one touch roof top.
Awesome, and look great on my jeep, the most aspect of it all is the slick design which make it for easy assemble from the gutter legs, railings and the basket,it really proclaim the the name ( Rhino ) tough
Hardware all rusted after 1 winter and they had to be pried and hammered off my Jeep! Really disappointed in this product
Easy to attach. Looks great.
Thank you for assisting with this purchase. Had little information for racks that would work with the 1 Touch Skytop on the Wrangler. Knowledgeable staff, smooth order and great installation. Very happy with the overall service.
2021 Jeep Wrangler Sahara 4XE with 1 Touch Skytop Roof
Jeep wangler 2024 4xe with skyone touch top .Amazing the setup for my fishing kayak 12 feet. Everyone was looking at my setup on the road , and it was secure. Big thx to Kurt w & Paul B to recomand this kayak setup
10/10 www.Etrailer.
2011 Ford E350 Super Duty Van. These went together well after I received The adapters to let the Aero Bars mount to the legs correctly. They look great!
Durable looking product and has an easy install. On the roof of my van for the past year and still looking good. Holding out for 5 stars because I'm eating to see how it holds up in the desert sun after a few more years. Rhino-Rack is very hard to get information from regarding their products but etrailer had all the answers and gave me confidence with buying the product.
First off - excellent customer service! I called to ask about some parts and I received a “live” person in seconds. No phone button death loop, just a quick response. The assistant was helpful, professional, and knowledgeable.
Now for the other part - The 8” Rhino roof rack for our sky-touch wrangler jeep, worked excellent! Easy to assemble, great finish. I would highly recommend their Etrailer and their products. On the Big Island of Hawaii, these racks will get some use for sure!
Mahalo!
The folks at etrailer made it easy for me to get the right rack and crossbars for my Jeep. I have a skytop so the rack had to be tall enough to clear the top as it opens and closes (accordion style). The customer service person who helped me recommended the rack legs with the right amount of clearance and the right size cross bars. The website had photos of other Wrangler Unlimited owners with the rack installed on the same type of top. The video of installation was clear and thorough. No problems with the rack at all; still tight and flush on the gutter, no wind noise with the rubber inserts, doesn't look all weathered and beaten after a New England winter either. The boat on the rack only weighs about 45 pounds but the rack can easily handle double that or more.
Team was helpful in ordering the correct part. Delivery well managed. Installation straightforward.
They did the job, note that I had to make a spacer for each leg to still be able to take it the front panels off. Love the look also.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.