Replacement Hub Assemblies For 2500 lb Axle For Use With Grease
Updated 03/06/2017 | Published 03/03/2017
Products Featured in This Question
Question:
Ive got a dual axle Ram-lin boat trailer. Without tearing it down and not sure if Im going to mess with rear axle yet, Im looking to see if you can tell me what bear, race, seal kit I need for it. It currently has oil bath hubs in front axle that have no oil in at least one side now. So, I want to change over to grease. They are original axles to a 2500# axle according to Ram-lin. The hub is 4 on 5.5inch according to them too. Im not sure I agree with that. thanks!
asked by: Jeremy A
Expert Reply:
We can't determine what bearings and race you have based on a serial number. If they are in fact 2500 lb axles, that significantly narrows down our options. You will want to check the bearing numbers on the face of the inner and outer bearing of one of your hubs to determine fit. All of our 2500 lb hubs are 5 on 4-1/2 inch bolt pattern and have the same bearing for both inner and outer application.
For both inner and outer bearing # L44643 (1 inch diameter) you can use the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased # CE13210. This is the complete assembly including bearings, races, seals, cap, and lugs.
For an assembly that is not pre-greased, you can use the Trailer Hub Assembly for 2,500-lb Axles # DX22XR.
If you have a different bearing size or sizes, let me know and I will be happy to help you with replacement parts.
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Video: Trailer Idler Hub Assembly for 2,500-lb Axles: The Breakdown
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Video: Feature Breakdown: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles
- Q&A: Replacement Hub and Spindle for 2014 Ranger Trailer
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Determining Correct Bearing Kit for 1-1/16 Inch Trailer Spindle
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Search Results: trailer wiring
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer jack
- Shop: Brake Controller
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Search Results: trailer leaf springs
on Trailer Hubs and Drums
