Measurements Of Ultra Fab RV Trailer Hitch Mounting Plate That Welds To The Frame

Question

Question:

I'd like to know if I can install/weld trailer hitch receiver onto my travel trailer. I'm looking at Ultra Fab Products part #35-946403. My trailer is a 2014 Jayco SLX 184BH. I have just over 4-1/2 inches of frame to weld to.

asked by: Brian

1

Helpful Expert Reply:

I went out to the warehouse and measured the mounting plate of the Ultra-Fab 2" Trailer Hitch Receiver for 5th Wheel Trailer Frames, # UF35-946403, you'd be welding. It is 4 inches wide, 3 inches tall, and 2 inches long. I've attached a picture to help.

expert reply by: Jason S

1

click to enlarge

Answer 1

Thanks for the pictures. The Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403 you mention would be a great option for you since your trailer frame falls within the adjustable range and it has the beefed up tongue weight…

view full answer...

Answer 2

Yes, in order to carry a bike rack or cargo carrier on the rear of your 2018 Jay Flight SLX 184BS I highly recommend the Adjustable Width Trailer Hitch Receiver part #C13702 which is specifically designed for trailers and RV's and will give you a…

view full answer...

Answer 3

The Mount-n-Lock SafetyStruts #MO34VR simply add additional strength to the rear bumper on your 2022 Keystone Travel Trailer. To determine if you will be able to then attach a Bike Rack #S94FR using a 2" Receiver #e38HR you will need to contact…

view full answer...

Answer 4

Appreciate the photos, and we do have a hitch for you, but the Curt #13703 is for a max 72 inch wide frame measured outside to outside of the frame, and it looks like yours is 73 inches. So what you will need instead is a weld-on hitch that is…

view full answer...

Answer 5

Hi George, Most OEM bumpers are typically 4" x 4" so you could just go with the the #MNT72VR instead and add on the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets #MO34VR to increase the capacity of the OEM bumper to 400lbs.…

view full answer...

Answer 6

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 7

A trailer tire size 175/80-13 will replace either an A78-13 or B78-13 trailer tire. A 175/80-13 is going to have 3 load ratings: B at 1,100 pounds at 35 psi, C at 1,360 pounds at 50 psi, and D at 1,610 pounds at 65 psi. This size will have a diameter…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Measurements Of Ultra Fab RV Trailer Hitch Mounting Plate That Welds To The Frame

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching