bing tracking image
Q & A Icon

Dimensions of Fifth Wheel Trailer Hitch Adapters for Factory Rails on GM and Ram Trucks  

Updated 07/22/2024 | Published 01/04/2017

Question:

What are the measurements for the Dodge Ram underbed adapter for the puck system. I need to know the center to center for the front to back and side to side. The Ford adapter is 13 X 30, what is the Dodge and GMC?

0

Expert Reply:

The distance between the pucks on the Reese Adapter for Ram # RP30154 is 39-1/8 by 30-1/2 inches. I had to contact Curt for their Adapter Rails for Curt Fifth Wheel Sliding Hitches # C16023 that fits the GM, and according to them the pucks measure approximately 27 by 20 inches.

expert reply by:
0
Charles S
Nick profile picture

Nick

7/21/2024

How can I figure out what puck system I have in my truck? The system was installed by the previous owner, the dimensions are roughly 39½ wide by 21 deep. Any information would be greatly appreciated!

Jesse M. profile picture
Etrailer Expert

Jesse M.

7/22/2024

@Nick What truck is this in exactly? The dimensions you provided are very close to the dimensions of the Ram OEM puck system which is listed at 39" across and 22.6" deep when measured from the center of each puck.
Nick profile picture

Nick

7/22/2024

@JesseM it is a 2016 silverado 2500hd
Nick profile picture

Nick

7/22/2024

@JesseM to my knowledge it is not oem
See All (6) Replies to Nick ∨

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>