Spindle Washers for Dexter Trailer Axle with Idler Hubs
Updated 12/12/2016 | Published 12/11/2016 >
Products Featured in This Question
Question:
Hello, does this specific kit require a washer between the nut and bearing? I bought a complete kit axle, hub, etc but it did not come with a washer. If it does, can you tell me which exact one fits this exact set up? Thank you.
asked by: Chris M
0
Expert Reply:
Yes, spindle washers are to be used except in a rare occasion where they will not fit. However, the Dexter Trailer Axle with Idler Hubs # 20440I-ST-72 does not come with washer. You will need part # SW1000.
expert reply by:
Charles S
0
Product Page this Question was Asked From
Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Washer For 1" Spindle
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Video: The Low-Down on the Dexter Tang Washer
- Video: Detailed Breakdown of the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles
- Video: Remove and Reinstall a Trailer Hub Review
- Video: Detailed Breakdown of the Replacement Spindle Washer
- Q&A: Installing TruRyde Replacement Tang Type Spindle Washer
- Q&A: Is the Castle Nut and Lock Washer Included with the Dexter Axle Part # 7685269
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Q&A: Are D-Washers and Tang Washers Both Necessary on Trailer Spindle
- Q&A: Is a Spindle Washer Needed Between the Spindle Nut and Outer Bearing on Dexter 5 on 4-1/2 Hubs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: What Replacement Converter Do I Need for a Series 7300 Model 7345 Converter?
- Q&A: Replacement 2K Idler Axle for Carry-On Trailer Model 5x10GW2K
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer



