Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
Updated 10/31/2016 | Published 10/30/2016
Question:
I need two trailer hubs. 4 bolt on 4. L44643 bearings inner and outer.1.250 seal ID 4.135 measured thru the bore. 1/2inch studs. Hub OD is 5.225. The trailer is rated at 1000 pounds. It was made by Housee Miller model HM506. Do you have a recommendation? Thank you
asked by: Mike H
0
Expert Reply:
The trailer hub part # AKIHUB-440-2-1K matches exactly what you would need. Bearings, bolt pattern and stud dimensions are the exact same.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Suspension Enhancement
- Shop: Spare Tire Cover
- Shop: CE Smith Spare Tire Cover - up to 21" Diameter x 6-1/2" Wide Trailer Tires - Black
- Q&A: Recommended Rear Anti Sway Bar for a 2005 Dodge Ram 2500 Diesel
- Shop: Wheel Cover
- Shop: Roadmaster Rear Anti-Sway Bar - 1-1/4" Diameter
- Shop: Adco Ultra Tyre Gard RV Tire Covers for 18" to 22" Tires - Single Axle - White - Qty 2
- Shop: Hellwig Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter
- Shop: Adco Tyre Gard RV Tire Covers for 18" to 22" Tires - Single Axle - Diamond Plate - Qty 2
- Shop: Roadmaster Rear Anti-Sway Bar - 1-3/8" Diameter
- Search Results: boat trailer tire
- Search Results: bearing buddy
- Search Results: leaf spring bushing
- Video: Let’s Check Out the Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel
- Shop: Camper Tie-Downs
- Video: Nylon Bushing: The Breakdown
- Q&A: Replacing Trailer Axle Spindle From Older Short Spindle To BTR E-Z Lube Spindle
- Q&A: Can a Trailer Spindle with Grooves Still be Used if Bearing Fits
- Q&A: Is a Spindle Washer Needed Between the Spindle Nut and Outer Bearing on Dexter 5 on 4-1/2 Hubs
- Search Results: drag wheel
- Search Results: spare tire tongue mount
- Q&A: Will a 5.30 x 12 Trailer Tire Fit the Same Rim as a 4.80 x 12 Trailer Tire
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Difference Between Tire Sizes 4.80-12 and 5.30-12
- Search Results: l44649
- Search Results: l44649 seal
- Video: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy Spec Review
- Video: All About the Trailer Idler Hub Assembly for 2,000-lb Axles
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs