Can Extra Chain Links on Titan Tire Chains be Cut Off

Question

Question:

Do you suggest pre-fitting and then cutting off any excess chain on ends, so it will not ding alloy rims?

asked by: Clyde

0

Expert Reply:

Titan Chain Snow Tire Chains # TC2828CAM have a device to hold the excess chain. If you wanted to remove a few links you could do so but be careful because there may come a time when you need that extra slack since not all tires of the same size are exactly the same size.

expert reply by: Michael H

0

Answer 1

For your 2016 RAM 2500 with tires sized 275/70-18 you can use the Titan Chain # TC3229CAM with twisted links and ladder design. The Twist-Link Snow Tire Chains are better for snow purposes than ice. Square-Link Chains like part #TC3229S work better…

view full answer...

Answer 2

The Titan Chain Snow Tire Chains with Cams - Ladder Pattern - Twist Links - 1 Pair #TC2221CAM if being used on the correct tire sizes should not have loose ends. The cam tighteners should remove any slack that would be an issue. Your option is to…

view full answer...

Answer 3

I'd recommend removing the extra links as that will be safer than trying to secure them. This way you'd never have to worry about the links becoming unsecured and hitting something in your already tight clearances.

view full answer...

Answer 4

Titan recommends removing excessive links from their chains to prevent damage like you mentioned. There wouldn't be a reliable way to clip them out of the way either as there would be a chance it would come undone and beat up your vehicle.

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The plate you are referring to in the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty #RAS3611-CHD will replace the upper overload on your suspension if you have it.

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

Thanks for supporting a local business Christopher! So long as your 2012 Chevrolet Silverado is a 1500 and you need a class IV hitch, the Curt item #14301 is going to be the best option. It has a 2" receiver with a 10,000 lbs towing capacity and…

view full answer...

Answer 12

Hey Thomas, I went out to the warehouse and measured for you. The Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" #C59UR measures just under 6" from the bracket where it bolts to the frame, to the top of the tube/receiver. Sounds…

view full answer...

Can Extra Chain Links on Titan Tire Chains be Cut Off

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching