Are Reese Universal Base Rails The Same As Curt Universal Fifth Wheel Base Rails

Question

Question:

Are the reese railspn58058 the same as the curt rails 16204

asked by: Len

0

Expert Reply:

The Reese Universal Base Rails, part # RP58058 and the Curt Base Rails, part # C16204 are both universal fifth wheel base rails, although not identical.

They will work with Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky fifth wheel hitches. But they will not work with Reese Elite Series (Signature Series) or Valley UBS hitches.

expert reply by: Jeffrey L

0

Answer 1

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 2

So it sounds like you are just looking for a 7 foot 5th wheel wiring connector for the bed of your 2003 Chevy Silverado 2500 and allows you to retain the use of the factory 7-way We do have exactly what with the Curt 5th Wheel/Gooseneck Custom Wiring…

view full answer...

Answer 3

The two rails you mentioned, part #RP58058 and #C16204, are basically the exact same rails made by two different companies. They are both made to the industry standard rail design so either will work great with the Reese hitch part #RP30083 that you…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Are Reese Universal Base Rails The Same As Curt Universal Fifth Wheel Base Rails

Products Featured in This Question

Continue Researching