How to Pick Out the Correct Ball Mount
Published 10/13/2016
Question:
I have a Chevy Tahoe and a two horse Kingston trailer. How much do I need on my ball mount to keep the trailer level? Thanks for your help.
asked by: Bob L
Expert Reply:
I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will measure the coupler height from the ground to the bottom of the trailer coupler when the trailer is on level ground.
Next, you will need to compute the difference. If the hitch height is greater than the coupler height the difference is the drop required. If the coupler height is greater the difference is the rise required. You will want to pick the ball mount with the rise/drop closest to the difference.
There really is not a maximum length of a ball mount that is considered safe. You will need to consider the height of your vehicle and not get one with a drop that would put the ball mount platform to close to the ground.
Product Page this Question was Asked From
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- Steel Shank
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Draw-Tite
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: wiring
- Search Results: custom fit vehicle wiring
- Search Results: trailer wiring
- Search Results: trailer hitch
- Search Results: 1 1/4 hitch riser
- Video: Review of etrailer Hitch Adapters - High Low Fixed Adapter Tow Bar 4 Inch - e25ZV
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Q&A: Recommended Trailer Wiring for 2017 Honda Civic Hatchback
- Video: Install: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector on a 2019 Honda Civic
- Shop: etrailer High-Low Fixed Adapter for Tow Bars - 2" Hitch - 4" Rise/Drop - 10K GTW
- Shop: etrailer Ball Mount w/ Pre-Torqued 2" Ball - 1-1/4" Hitch - 3-7/8" Rise - 3,500 lbs
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: TowSmart Trailer Connector - 4-Wire Flat Set - 12" Trailer - 48" Vehicle
- Shop: Converter/Riser Mount for Advantage SportsRack V-Rack 2 Bike Carrier - 1-1/4" Hitches
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Clean Up Your Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Video: How to Choose a Trailer Brake Controller
on Trailer Hitch Ball Mount
