Can Hopkins Breakaway Kit Replacement 12 V Battery # HM20008 Replace Tap 12V 5A 20 Hour Battery

Question

Question:

I have a tap 12-5 battery 12V 5A 20hr part 310-0209-12. Is the battery showing on your web a replacement ? Thanks

asked by: Jim C

0

Expert Reply:

I contacted our representative at Hopkins and he confirmed that the item you selected, Breakaway Kit Replacement 12 V Battery, part # HM20008, is the replacement battery that you need.

He also informed me that the Tap brand is under the Hopkins name now.

expert reply by: Reno H

0

Answer 1

Hello Doug, thanks for reaching out, and for providing those pictures. I have bad news and good news. The bad news is we do not offer a center cap plug that will fit your caps. The good news is the AC-490 TT center cap is a standard size, for a…

view full answer...

Answer 2

The correct replacements we offer for the Glo Brite Marker Lights 118A and 117R is the Trailer Clearance or Side Marker Light part #MC44AB for amber and part #MC44RB for red.

view full answer...

Answer 3

The Trailer License Plate Holder with LED Light #328-003-71BE uses non-submersible lights. Although this would not work well on your boat trailer, I have a different solution. I recommend using the LED Trailer License Plate Light #LPL82CBB. This…

view full answer...

Answer 4

For your Glo-Brite 118A amber light the replacement lens that will fit is the Optronics #A44AB; the lights themselves are the Optronics #MC44AB. The Glo-Brite 117R can use replacement lens #A44RB while the light is #MC44RB. I've added links to…

view full answer...

Answer 5

Replacement Battery Box for Curt Soft Trac I Trailer Breakaway Kits - Side Load #C52027 has outside dimensions of 5" long x 3-3/4" wide x 3-3/8" tall and will fit the UB1250 style battery we carry which has dimensions of 3-1/2"…

view full answer...

Answer 6

Hi Keith; you could replace the battery with the #HM20008 but I would go ahead and replace the entire thing with #20099. If you replace the whole kit you're getting the battery and a usable battery connection plus you don't have to worry…

view full answer...

Answer 7

Yes, replacement breakaway kit battery #HM20008 is the correct replacement for the Hopkins Engager system #20099. Its also the only replacement battery Hopkins offers.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Can Hopkins Breakaway Kit Replacement 12 V Battery # HM20008 Replace Tap 12V 5A 20 Hour Battery

Continue Researching