Can GloLIGHT LED Light part # STL111RCB Fit in Opening of Custer Light Mounting Box AL65-0

Question

Question:

Optronics STL111RCB LED Lamp has bracket BK70BB associated with it that has listed the opening at 6-11/16inch x 2-5/8. Custer AL65-0 Oval Lamp Housing has listed the opening at 6-1/2inch x 2-1/2. Are these compatible? I could not find any housings that did not listed the same opening as the bracket,

asked by: David

0

Expert Reply:

Yes, if you wanted to install the # STL111RCB in the opening of the # AL65-0 all you would need is the correct grommets, part # a70gb.

expert reply by: Jameson C

0

Answer 1

For a rectangular white LED-type backup light I suggest the Optronics Flush Mount LED Backup Light #BUL35CB. This recessed-mount light uses an industry-standard plug like #A45CB and a mounting grommet #A33GB. Please click on the video link for more.

view full answer...

Answer 2

You will need the Hopkins Tail Light Converter #HM48847 to connect a set of lights like the GloLight LED Trailer Tail Light #STL111RCB on your 2001 Jeep Cherokee. This converter will take the tail light 3 wire inputs from the vehicle and combine them…

view full answer...

Answer 3

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 4

Hello Josh, thanks for reaching out. We do offer a set of guide posts with LED lights on top. Take a look at the following: - CE Smith Post-Style Guide-Ons with LED Lights for Boat Trailers - 40" Tall - 1 Pair #CE27740 The LED lights can be…

view full answer...

Answer 5

The mounting hole diameters of the install bracket #A65PB for the Thinline light part #MCL75RB are 3/16 inch in diameter. 1/8 inch diameter screws or rivets would work well. Aluminum isn't going to be as strong as steel but if the light assembly…

view full answer...

Answer 6

Like most trailer wheels the wheel that comes with the Taskmaster Wheel and tire part #TA87VR you referenced has a zero offset which means the backspacing is half of the width of the wheel plus one inch for the mounting lip. So that means the…

view full answer...

Answer 7

The Hydrastar Extra Capacity Reservoir #HS85-1020 will sit directly on top of your current Hydrastar system to add an additional 1 quart of capacity. I do have a picture that I have included of the reservoir mounted on top of their main unit. We…

view full answer...

Can GloLIGHT LED Light part # STL111RCB Fit in Opening of Custer Light Mounting Box AL65-0

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching