Feature Review LED Combination Trailer Tail Lights Video

The part number you gave me just comes back to the lens of the light, which is used on multiple models, like the #403026 so I don't know the exact light bulbs used in your trailer lights. That being said you could pull the bulbs to see what they…

I'm happy to inform you that the Hitch Lock for Kuat Bike Racks, part #HL2, is indeed compatible with your Transfer V2 Rack, part #KU24FR. This lock includes an integrated dust shield that keeps dirt and moisture out of the lock body. I've…

The Kuat Transfer V2 Bike Rack for 1 Bike - 1-1/4" and 2" Hitches - Wheel Mount #KU64FR uses the #HL2.

This is a fairly straightforward install. GM has already run some of the necessary wiring from the rear frame rail area to the engine compartment, so you will see a blue wire for the electric brake function, and an orange wire which provides 12 volt…

You will need to measure the diameter of the spindles where the seal and bearings ride. Check out the picture I attached that shows where this is. You will need an exact measurement so either a digital or dial caliper will be needed. To pick out the…

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

Yes, there is. To add a hitch to a 2024 Jeep Grand Cherokee 4xe you will want the Curt Trailer item #C96NR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs…

The #LC53ED is the correct replacement control brain for the Lippert 4 point leveling system on your motorhome. It is essentially the same controller for ALL Lippert 4-point leveling systems. This leveling system is common on fifth wheels, but we…

We can get you set! To answer your question the wires on the LED Combination Trailer Tail Lights part #TLL16RK are going to be Brown= tailight Green= turn and brake White= ground The white wire is where I believe the problem lies. Since the entire…

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

We recommend having about 4" of clearance height-wise to account for suspension movement and at least 2" width-wise between your tire and trailer fender or trailer frame like part #HP66VR that was referenced. Since you are building a…