Where to Attach E-Track to Aluminum Bed Trailer for Max Holding Strength
Updated 09/07/2016 | Published 09/06/2016
Question:
Hello, I have a 28 foot RNR aluminum deck open car hauler and was looking at mounting Etrack to add tie down versatility. I was reviewing the qanda and see there are 2 different answers for mounting to an aluminum trailer. 1 uses backing plates through the decking and the other suggests mounting to the cross beams. The trailer has D Rings with backing plates presently. The E Track will be used for securing one end of a small car when Im towing 2 cars. The heaviest car is less than 3000lbs, and will be tied down using Etrack on end end and the d rings on the other.. It will also be used for odd shaped lighter items, scooters, golf carts, etc. what is the recommended mounting method for Max strength, and if backing plates are to be used, what is the recommended spacing interval? Thanks !
asked by: Joe O
Expert Reply:
For maximum strength of mounting E-tracks to an aluminum trailer bed you really want to go down to the frame of the trailer. I am sure the aluminum bed of your trailer is pretty strong since it is car hauler but the frame will definitely be the strongest attachment method.
You can also try contacting the manufacturer of the trailer to see what they would recommend as well.
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E Track
- E Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Continue Researching
- Video: Comprehensive Review: etrailer E Track Heavy-Duty O-Ring Tie-Down Anchor
- Article: How to Install E-Track in 3 Easy Steps
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Search Results: e track backing plates
- Q&A: Can E-Track Be Installed Over Rubber Non-Ski Covering On Wood Floor in Trailer
- Shop: Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel - Qty 2
- Search Results: e track
- Search Results: e~track backing plate
- Shop: etrailer E Track Heavy-Duty O-Ring Tie-Down Anchor - 2,000 lbs - Qty 1
- Search Results: bridle
- Search Results: winch straps
- Search Results: winch
- Q&A: Installing Erickson Horizontal E-Track System In Enclosed Cargo Trailer
- Q&A: Can E-Tracks Be Cut Or Bent for Installation?
- Q&A: Should the Tires Sit on Top of the E-Track System When Installed in a Trailer
- Q&A: E Track Mounting Recommendations
- Q&A: Can E-Tracks Attach to Dovetail of Trailer
- Q&A: Attaching E-Track to Wooden Trailer Floor
- Shop: Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- Shop: Erickson E Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Search Results: e~track anchor