Replacement Wheel and Tire Possibilities for a 4.30-12 Wheel and Tire on a Landscape Trailer
Published 10/12/2010
Products Featured in This Question
Question:
i have 4.30x12 tires on my landscaping trailer cant find that size what would match that or do i need to replace both sides?
asked by: jim
Expert Reply:
Your 4.30 by 12 inch tire and wheel combination is roughly 18.8 inches tall and 4.3 inches wide. At this time we do not carry a wheel and tire combination that small.
You may be able to use a 4.80-12 Load Range B tire and wheel combination, item # AM30580, or a 4.80-12 Load Range C, tire and wheel conbination, item # AM30620, if the wheel bolt pattern on your trailer is 4 on 4 inches and the axle capacity is less than, 1,980 pounds for the load range C tire and wheel, or less than 1,570 pounds for the load range B tire and wheel.
If all of the above works out you will need to make sure that the 4.8 inch width and 20.5 inch overall diameter of the larger tire and wheel combination will work on your trailer without rubbing when loaded or when encountering rough roads.
If a combination mentioned above will work for you, keep in mind that the ST (special trailer) tires should be ran at the PSI rating stated on the sidewall of the tire.
I would venture that the 205/65-10, load range E tire and wheel combination, item # AM3H490, that you selected would be far to wide, at 8.4 inches, to replace your 4.30-12 tire and wheel combination.
Product Page this Question was Asked From
Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range E
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range E
- 205/65-10
- 10 Inch
- N - 87 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Terran Industries Double Lip Grease Seal - I.D. 1.249" / O.D.1.983" for 2K to 2.5K Axles
- Search Results: dx66
- Search Results: bearing buddy bra
- Search Results: hitch
- Search Results: 421r
- Shop: Lippert Grease Seals - Double Lip - ID 1.719" / OD 2.565" for 3,500-lb to 4,400-lb Axles
- Search Results: trailer fenders
- Search Results: boat winch roller
- Search Results: boat winch
- Shop: Dexter DX6.6 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 6,600 lbs
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Shop: Replacement Bearing Buddy Bras - Model 23B - Qty 2
- Shop: Single Axle Jeep Style Trailer Fender - Smooth Aluminum - 13" to 15" - Qty 1
- Shop: Tie Down Single Round Fender for 13" to 15" Wheels - Aluminum Tread
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Video: How to Choose a Trailer Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Shop: Brake Controller
- Shop: Gooseneck Hitch
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
on Boat Trailer Wheels
