What is the Backspacing on Dexstar Conventional Steel Wheel with Offset - 15

Question

Question:

AM-20504 wheel what is the backspace measurement

asked by: Todd W

0

Expert Reply:

Wheel # AM20504 has a 1/2 inch positive offset meaning that the mounting surface of the wheel is further away from the trailer which moves the tire closer to the frame. The backspacing is approximately 4 inches from the mounting surface to the edge of the wheel closest to the trailer.

expert reply by: Michael H

0

Answer 1

You can determine whether either of our baby moon hubcaps, part #AM90086 or part #AM981306, will fit a wheel by measuring the outer diameter of the inner ring and then the outer diameter of the inner ring with one of the tabs (see attached photo).…

view full answer...

Answer 2

Yes, baby moon hub cap #AM90086 will fit Dexstar Conventional Steel Wheel #AM20514. This particular baby moon fits 13, 14, and 15 inch conventional steel wheels. I have linked a video featuring the baby moon hub cap for you.

view full answer...

Answer 3

Hi Jimm; mounting wheels and tires is not something we are able to do. The only way to get them mounted from us is if it is listed as a wheel and tire combo. If you purchase the Dexstar Steel Mini Mod Trailer Wheel #AM20245 and Karrier ST185/80R13…

view full answer...

Answer 4

The 1/2 inch positive offset of trailer wheel #AM20504 (which is a 15 inch and not a 13 inch)means that the wheels would be closer to the trailer frame than a model with zero or negative offset. From the mounting surface to the outer edge of the…

view full answer...

Answer 5

The Dexstar Conventional Steel Wheel + 1/2 inch Offset - 15 x 6 inch Rim - 5 on 4-1/2 - Black, item #AM20504, has a weight capacity of 1870 lbs. and would work great on your 7000 lb. GVW trailer. The only concern is the 1/2 inch positive offset of…

view full answer...

Answer 6

We offer four sizes of trailer wheel with the 6-on-5-1/2-inch bolt pattern: 14-1/2-, 15-, 16- and 16-1/2-inch. Some of these do have a pilot hole diameter that matches your, such as Dexstar wheel #AM20514 which measures 15 x 6. This wheel has a pilot…

view full answer...

Answer 7

We do have a wide variety of 15" trailer wheels that have a 6 on 5-1/2" bolt pattern that I have linked for you to filter through. Most of these have a pilot hole with a diameter that is about 4.25" wide, but then we do have some…

view full answer...

Answer 8

There are two different types of trailer hubs that will determine if the pilot hole on a wheel matters or not. First there are hubs that use wheel bolts to secure the wheel to the hub. These are called hub-centric. For this type, the pilot hole has…

view full answer...

Answer 9

Yes, the baby moon covers part #AM981306 that you mentioned would fit the Dexstar Conventional wheels part #AM20514 that you have.

view full answer...

Answer 10

We have the part #AM20514 which is a 15 inch wheel that has a 6 on 5-1/2 inch bolt pattern that can accept a baby moon cover that is 10-1/4 inch in diameter like the part #AM981306.

view full answer...

Answer 11

The baby moon covers will not fit on the Provider ST205/75R15 that you referenced. Those covers like the part #AM981306 need a conventional wheel like the part #AM20514.

view full answer...

Answer 12

When choosing a new hub/drum you want to match up a few things, including your wheel size and the set of bearings used in the hub. The bearings in the new hubs have to be the same as those in your current hubs in order for them to fit on your…

view full answer...

What is the Backspacing on Dexstar Conventional Steel Wheel with Offset - 15

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching