Trailer Hubs for Old Boat Trailer with 1 Inch Diameter Spindles
Updated 07/29/2016 | Published 07/28/2016
Products Featured in This Question
Question:
Im looking for a replacement hub for an older boat trailer. Its 4 on 4 with 1 inch spindles, the distance from the back of the inner race to the back of the outer race is 2 inches. Do you offer a replacement?
asked by: Jennifer B
Expert Reply:
To find the correct replacement hubs I would need to know the inner and outer bearing numbers stamped into the sides of the bearings. If the spindle is straight, meaning both bearings have the same inner diameter, then it probably takes a hub with L44643 bearings or L44649 bearings (the L44649 bearings are slightly larger with a 1.063 inch inner diameter).
If they are L44643 bearings then you can use idler hub # AKIHUB-440-2-1K. If they are L44649 bearings then you can use idler hub # AKIHUB-440-2-2K.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: All About the Trailer Idler Hub Assembly for 2,000-lb Axles
- Video: Comprehensive Review: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel
- Q&A: Trailer Idler Hub Assembly For a 1" Diameter Spindle That is 4-1/4" Long
- Q&A: Replacement 5 On 4-1/2 Bolt Pattern Boat Trailer Hub for 1 Inch Spindle
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range B
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Q&A: How Long Is The Malone LowBed MicroSport Trailer With The Retractable Tongue Kit
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Q&A: Replacement Hub for a Malone LowBed MicroSport Trailer MAL25FR
- Q&A: Lift Kit for 1994 Featherlite with Torsion Axle
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: How to Replace or Install an RV Roof Vent