This lightweight aluminum trailer wheel resists rust and features a matte black finish with an open-spoke design. Built for everyday trailers, haulers, and campers.
Getting the right fit shouldnt be complicated. This wheel measures 13" in diameter by 4-1/2" wide, has a 5 on 4-1/2" bolt pattern, a 3.19" pilot diameter, and uses 1/2"-20 wheel bolts with a 0 offset.
Unlike steel wheels, this one won't rust or peel. The aluminum keeps the weight low and the look intact, even after miles on the road. It's one less thing to worry about if your trailer sits outside or sees regular use.
For smaller cargo or utility trailers, this wheels 1,740-lb load rating hits the mark. You're not overpaying for capacity you don't need, but you're still covered for weekend runs, yard work gear, or that lightweight camper.
This rim uses a standard 5 on 4-1/2 bolt pattern, so it bolts right onto most light-duty trailer hubs without any weird spacing or adapters. If you're replacing an old wheel, it'll drop right in without a headache.
There's nothing worse than having to constantly re-tighten lug nuts after every tow. This wheel solves that with steel inserts built right into the lug nut wells. They prevent wear and help keep the wheel securely seated on the hub. That's extra peace of mind mile after mile, no matter how often you're on the road.
Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are (also called bolt holes)
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steve here with etrailer. Let's take a quick look together at this aluminum AMO3 series matte black trailer wheel. Now this is gonna be a 13 inch wheel overall, the diameter. with a five on four and a half inch lug pattern. Now this is compact, as you can see, nice and small.
It's gonna be great for light duty utility and small boat trailers. I think it has a nice balanced look. It's got a nice machined face. And this open spoke design here to me just gives it a nice clean look and it's gonna be great on any trailer. Like I said, most likely boat trailers though.
It is rated to 1,740 pounds. So again, that's light duty small trailers. And again, it does have a five on 4 1/2 inch lug pattern. And you can look up on the product page exactly how and where we're measuring that on these wheels. The pilot diameter, if you're looking for a center cap, it's 3.19 inches and the wheel bolt sizes are 1/2 by 20.
Now these do have a pressed in add-on on each of these lug holes, so that's gonna give you greater stability and help center everything up whenever you're putting it on. And of course, you got that aluminum build so it's lightweight, and the matte black finish and clear coat are gonna resist corrosion and scratches. And that's gonna wrap up our quick look together at this aluminum AMO3 series wheel. I'm Steven. Thanks for watching.
.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.