Tallest Trailer Tire that Can Replace a 4.80-8 Size Tire

Question

Question:

How large of a tire can I put on the 8 inch rim of my trailer 4.80x8 on now?

asked by: Art

0

Expert Reply:

For your rim that has a 4.80x8 tire installed on it you could go up to the 5.70-8 size tire like the part # AM10012.

This tire will be 2 inches taller in overall diameter.

expert reply by: Jameson C

0

Answer 1

I do have an option for you but it doesn't look like you have room for larger tires without modifications and that's how you'll obtain a higher speed rating. That said, we do offer wheel/tire combos in the size you need with a slightly…

view full answer...

Answer 2

A 4.80-12 size trailer tire will have an overall diameter of right around 20-1/2 inches, compared to the overall 16-inch diameter on your existing 4.80 x 8 units. Based on the 19-inch maximum you mentioned in your question, it might not be possible…

view full answer...

Answer 3

Hi Jefferey; the #AM35354 is only slightly larger so you will probably be able to use it to replace your current tires. However, you will still need to measure for clearance to be sure. This ST145/R12 tire has an outer diameter of 21.3" and…

view full answer...

Answer 4

I have several options to upgrade 4.80-12 wheel/tires on a trailer without replacing hubs, ranging from 13" - 15". The best option will really come down to how much space you have available and this will be different for each trailer. The…

view full answer...

Answer 5

Yes, you can upgrade from 4.80-8 tires to 4.80-12 tires. The width of the tire and the bolt pattern will be the same so it can work. We don't have any load range D options in that combo. I recommend using the Kenda 4.80-12 Bias Trailer Tire with…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Tallest Trailer Tire that Can Replace a 4.80-8 Size Tire

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching