What Do Old Warner Trailer Brake Assemblies Look Like

Updated 06/08/2020 | Published 07/13/2016

Question:

Can you tell me what brand of trailer brakes this is and where I can get replacements? They are 12inch and 2inch width. Thanks!

asked by: Jeff

Expert Reply:

Those are Warner trailer brakes. This style is not made anymore and replacement parts are hard to find. We have some parts for the larger Warner assemblies but NOT the 12 x 2 inch ones.

Most people end up replacing them. You will have to have standard brake mounting flanges welded to the axle, see link, if it doesn't have them already. You will also need to replace the hub and drum assemblies. For that I would need to know the inner and outer bearing numbers stamped into the sides of the bearings. I also need to know the wheel bolt pattern. I have linked a help article that explains measuring for bolt pattern.

expert reply by: Michael H

click to enlarge

Gerald

6/8/2020

i have a 10''drum i need the breaks made by warner parts are hard to find best thing to do is replace whole axle because newer barrons wont fit old axle i tryed failed i can have breaks repaded for 80 bucks plus shipping drums are opsaleet