Replacement Cover for Jensen Z26 AS 13 Roof Vent

Question

Question:

I have a Jensen Z26 AS 13 white roof vent cover I would like to replace . It measures 13 1/4inch from outside lip to outside lip and has three hinge bars. Would you have a replacement for this model?

asked by: Keven N

0

Expert Reply:

If your old vent cover was held on by a pin, we have some replacement vent lids that would work great for you. For white, use part # CAM40154 or for smoke colored, use # CAM40147.

expert reply by: Mike L

0

Answer 1

The closest we have is the Curt Ball Mount part #C45030 which has a drop of 2-1/4 inches which would be close enough to the 2-1/2 inch drop you need. For a 2 inch ball you would need the part #63845 or for 2-5/16 inch ball you would need the part…

view full answer...

Answer 2

Hey Tom, congrats on the new car. To add a roof rack to your 2026 Subaru Outback Wilderness, I recommend the Thule SquareBar Evo Roof Rack for Raised Rails item #TH34FR25JX. The square crossbars and the wider length is going to work the best out of…

view full answer...

Answer 3

Hey Chip, yes I agree the metal lid of the Ventline Ventadome part #V2110SP-24 is going to hold up the best over time which would mean you wouldn't have to worry about replacing the lid for a very long time. How old is the trailer?

view full answer...

Answer 4

In order to determine the correct replacement lid for your 1996 Dutchman Thor, you are going to need to measure your actual vent. The most common size vents are 14-1/4" x 14-1/4" so you'll want to verify that yours is a standard vent.…

view full answer...

Answer 5

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 6

Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly…

view full answer...

Answer 7

Yes you can order a specific Thule lock core number. The lock core number is on the face of the lock or on the key. So for example if the lock or key read N106 then the lock for it is #THLOCKN106. In order to install the lock you will also need…

view full answer...

Answer 8

The CE Smith Sport Boat Trailer part #CE48810 can be used with your Porta-Bote. Since the bunks are adjustable in width and in angle relative to the hull of the boat this could easily accommodate what you have.

view full answer...

Answer 9

The 60" Yakima HD Crossbars #Y01157 are going to be 60" from end to end including the caps. As you need 60" of T-slot you would need to step up to the 68" Crossbars #Y01158.

view full answer...

Answer 10

The Thule WingBar Evo Crossbars part #TH711400 that you referenced are 53" long. Therefore, the usable bar space will be 53". There is no restriction in bar space like there is for the Thule AeroBlade Edge System like part #TH7502-TH7502 in…

view full answer...

Answer 11

If you are looking for crossbars that can accommodate the 12mm T-slots, the closest confirmed top channels we have are Yakima crossbars like the Yakima HD Crossbars - Aluminum - Black - 68" #Y01158 or Rhino-Rack crossbars like the Rhino-Rack…

view full answer...

Answer 12

Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars #Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers #Y33TR and the HD Bar Adapter #Y03541 to complete this…

view full answer...

Replacement Cover for Jensen Z26 AS 13 Roof Vent

Products Featured in This Question

Continue Researching