See what our Experts say about this Camco RV Vents and Fans

• How to Determine Which Trailer Roof Vent Cover will Fit a Trailer
  In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
  view full answer...
  
• Replacement Vent for a 1975 Wilderness Camper Trailer
  We do have replacement vents and vent covers that you can choose from. It is most likely a 14 x 14 vent as that is the most common, but you will want to measure yours just to make sure. A great 14 x 14 option that looks clean and is functional is the Ventline Ventadome Trailer Roof Vent # V2092SP-28. It comes with a white cover and is operated manually so it is less expensive than an electronic option. I have attached a video of this vent being install on a trailer for you to check out....
  view full answer...
  
• Replacement Roof Vent Cover Needed for a 2019 Coachmen Class C Motorhome
  We do have quite a few replacement options for the vent cover on your 2019 Coachmen Class C motorhome. Even though you measured 13" x 13" you will be looking for a 14" x 14" replacement vent cover. To obtain a correct vent cover replacement you simply need to choose what kind of hinge your current vent cover uses. We have covers with a continuous hinge like part # BV0554-01, a 3-point hinge like part # CAM40153, or a 4-point hinge like part # CAM40154. If you are unsure as to what hinge...
  view full answer...
  
• Replacement Vent Covers for a 1969 Wilderness Camper Trailer
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
  
• Replacement Vent Cover Recommendation for a Rockwood Signature Travel Trailer
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• Picking Out Replacement Roof Vent Cover for 2010 Arctic Fox B1150
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
  
• Determining Correct Replacement Vent For Jensen 7000 Series Vent
  Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
  view full answer...
• Identifying Replacement Vent Lid When The Plastic Lid Is Gone
  To determine which replacement lid you need you will need to check the hinge on the roof of your vent lid. I have included an chart that has the most common lids and shows the hinges. Once you identify the hinge you will need one of the following covers. Jensen for Metal Vent(starting with 2004) # CAM40153 Jensen-Pin Hinge(prior to 1994) # CAM40154 Ventline (prior to 2008) Elixir(starting with 1994) # CAM40155 Elixir(prior to 1994) # CAM40156 Ventline(starting with 2008) # BVD0449-A01
  view full answer...
  
• Replacement Roof Vent That Measures 13 X 13
  You do not have to buy a new RV, from your photo it looks like you need Replacement cover part # CAM40153. Although the vent itself may be considered 14 x 14 some roof vents came with smaller covers. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point...
  view full answer...
  
• Replacement Roof Vent Cover for a Keystone Cougar 327RES 5th Wheel
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• Replacement Roof Vent for Pace American Trailer
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• Replacement Cover for Jensen Z26 AS 13 Roof Vent
  If your old vent cover was held on by a pin, we have some replacement vent lids that would work great for you. For white, use part # CAM40154 or for smoke colored, use # CAM40147.
  view full answer...
• Installation of Replacement Lid for RV Vent with 3-Point Hinge
  In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
  view full answer...
  
• Is It Necessary to See Vent Hinge on RV to Determine Correct Replacement Vent Lid
  Good question, and the answer is you do have to physically look at the hinge of your RV's vent in order to know the cover you need. There is no way to know any specific trailer parts based just off of the year, make and model of trailer. If you refer to the accompanying photo I added, you can see that there are four types of hinges: A continuous hinge such as the Ventline # BVD0449-A01, 4-point hinge such as the Replacement Lid for Jensen RV Roof Vent # CAM40154, and 3-point hinge such...
  view full answer...
  
• Replacement Vent Cover Recommendation for a 1982 Avion Trailer
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• Replacement Vent Lid for an Elixir Vent
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• How To Find Replacement Vent Lid For a 2013 Continental Cargo GANS612SA Enclosed Trailer
  To determine which replacement lid you need you will need to check the hinge on the roof of your vent lid. I have included an chart that has the most common lids and shows the hinges. Once you identify the hinge you will need one of the following covers. Jensen for Metal Vent(starting with 2004) # CAM40153 Jensen-Pin Hinge(prior to 1994) # CAM40154 Ventline (prior to 2008) Elixir(starting with 1994) # CAM40155 Elixir(prior to 1994) # CAM40156 Ventline(starting with 2008) # BVD0449-A01
  view full answer...
  
• Vent Cover Replacement for a Lark Utility Trailer Availability
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• Replacement Hengs and Jensen Vent Cover with Pin Hinge
  Most likely we have what you are looking for but you will need to first determine what vent style you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
  view full answer...
  
• Replacement Vent Cover for Wells Cargo RF85X244 Trailer
  We don't really have any way of knowing exactly what vent and cover you've got on your Wells Cargo trailer, but we can help you find the appropriate replacement. Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover,...
  view full answer...
  
• Are Roof Vent Covers All The Same Size and How to Choose Replacement
  So to answer your question about the vent size, they are not all 13-1/4" x 13-1/4" as the sizes can vary somewhat. The part 69284 you mentioned has been discontinued, but apart from that most replacement roof vent lids are 14" x 14" or very close in order to fit on top of the vent. The industry standard for roof vents is 14" x 14", and that is likely what you have, though if you aren't sure of the model of your vent, to determine the right replacement is to a look at the hinge and find...
  view full answer...
  
• Replacement Roof Vent Cover for Haulmark Trailers
  In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
  view full answer...
• Replacement Bathroom Vent Cover for 2017 Lakota Horse Trailer
  Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
  view full answer...
• Replacement Vent Cover for 1988 Terry Travel Trailer
  In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on...
  view full answer...

Do you have a question about this RV Vents and Fan?