Anti-Rattle Device for Curt Adjustable Ball Mount # C45902 on a 2013 Ram 3500  

The B&W silencer pad, part #BWTS35025, fits all of the 2-1/2 inch B&W Tow & Stow ball mounts, like part #BWTS20049B as an example. With that being said, since trailer hitch pin holes aren't all at the exact same depth sometimes you…

We definitely have a lock and an anti-rattle device for your Blue Ox Adjustable 2-Ball Mount - 2-1/2" Hitch #BLU85XR but since this has a solid shank we will need to use 2 pieces as opposed to a part that has them integrated together. I…

The Curt Adjustable 2-Ball Mount #C45902 is manufactured overseas. If you are looking for a similar made in the USA adjustable ball mount the Flash Solid Steel HD Adjustable 2-Ball Mount #FA49-00-5625 has the same 2-1/2" receiver, 6" drop,…

Curt trailer hitches are manufactured in the USA but not the supplemental parts like ball mount #C45902. For one that is made in the USA and is similar I recommend #BWTS20037B. But it maxes out at 18K with the 2-5/16 inch ball. The Curt model #C45902…

All of the B&W products, including the B&W Tow & Stow 2-Ball Mount #BWTS20040B you referenced, are made in the USA. This is a great ball mount that is made to last as you can see from the many positive reviews that it has received.

Hitch pins like #C23556 do not have a weight rating or shear strength data because their actual capacities far exceed the abilities of the hitch or vehicle. Basically, the hitch or some other component would fail before the pin even comes close. The…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

This will depend on if you have a Dually #TL94PR or Single #TL67DR rear wheels on your 2021 Chevrolet Silverado 3500 long bed. These are a fit for the factory receiver, if you have or want to switch to a TorkLift Receiver #TL74FR this would use a…