Feature Breakdown: Curt Lock Set for Adjustable Channel-Style Mounts Video

You can fit the #C31083 on your 2023 Ford F-150 with the FX4 package but you will need to make modifications. The skid plate can be reinstalled but it will have to be trimmed to get it to fit. Technically the auto air damn can also be modified to…

Hello Doug, thanks for getting in touch. The EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH87SR will indeed fit your 2023 Ford F150 XLT 3.5 ecoboost. The only thing you need to watch out for is the auto-deploying front air dam. If the…

High William; we haven't had an F-150 come in for installation with the Active Air Dam so we don't have it in an installation video. I went ahead and attached a picture of the #EH87SR instructions below showing what the process is like. It is…

Hello Steve. The EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH87SR will indeed fit on a 2024 Ford F150. The OEM skid plate will need to be either trimmed or removed. Another thing to watch out for is the auto deploying air dam. If the auto…

The Draw Tite hitch part #65067 is a fit for your 2022 Ford F-150 as long as it doesn't have the auto deploying air dam. It would not reduce ground clearance either since it fits the air dam gets cut around it when installed.

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

I must admit to not being sure what you are referring to. The Curt Channel Style Adjustable Ballmount #C45900 does not have the three holes as the anti rattle piece ( #C24DR ) screws into the back of the actual ball part (see picture). Was there…

The front air dam on your 2023 Ford F-150 Platinum will actually need to be removed to be able to install any of the front hitches. So yes, the front air dam will no longer be operational once you have the EcoHitch Hidden Front Mount Trailer Hitch…

The Draw-Tite Front Mount hitch part #65067 installs so that it sticks out from the plastic air dam of the Ford. The hitch does not sit lower than the lowest part of the truck so it does not reduce ground clearance. I have attached a photo for your…

As long as the vertical pull (or push) on the Draw-Tite Front Mount Trailer Hitch, #65067, does not exceed 9,000 lbs. and the vertical weight does not exceed 500 lbs., then you will have no problem using this hitch on your 2016 Ford F-150. It sounds…

Curt hitch #C31083 is listed as a fit for the XLT trim on the 2018 Ford F-150. They do not specify anything regarding the FX4 package. You will most likely have to trim some fascia, skid plates, or remove them to complete the hitch installation of…

The Draw-Tite Front Mount Trailer Hitch Receiver #65067 will actually work with the auto deploying air dam on your 2022 Ford F-150, although there is some trimming of the air dam and the reinforcement bracket to get it installed (see attached photo…