Recommended Electric Over Hydraulic Brake Set Up for 2016 Montana 3710FL 5th Wheel
Updated 04/12/2016 | Published 04/08/2016 >
Products Featured in This Question
Question:
I am purchasing a 2016 Montana Model 3710FL fifth wheel RV. I would like to convert it to electric over hydraulic disc brakes. What do you suggest? I believe it has 7000 lb. axles. What would be the cost of parts from you to make this conversion? I have read good reviews for your Kodiak kits. Thanks for your help!
asked by: Fred J
Expert Reply:
I was able to confirm that your Montana 3710FL uses tandem 7000 lb axles. A 7K axle would typically have an 8 on 6-1/2 wheel bolt pattern and the spindles would be compatible with a 25580 inner and an 14125A outer bearing. You'll want to identify the inner and outer wheel bearings used by your current hub/drums. Let me know if your hubs uses a different outer bearing.
If your drums use the 25580 inner and 14125A outer bearing, I'd recommend the Kodiak 13 Inch Hub/Rotor Kit, part # K2HR712E. The races are included, but the bearings, seals, lug nuts and grease caps are sold separately.
Bearings # 25580 and # 14125A (sold individually)
Grease seal # RG06-070 (sold in pairs)
Lug nut # CE11051 (sold individually)
Grease cap # F001520 (sold individually)
Next, you'd need an electric over hydraulic brake actuator. I'd recommend using the Hydrastar # HBA16. According to our installers, the Hydrastar is the quickest acting and strongest actuator we offer. If your truck doesn't have a brake controller compatible with electric over hydraulic braking systems, I'd recommend the Tekonsha Prodigy P3, part # 90195 because of it's user-friendly display and controls. Next, you'll need a brake line kit like # HS496-252. Finally, you'll need a breakaway system. I'd recommend the # T4822100 from Titan.
I've linked you to the parts I've recommended. If you use each link, you can see current pricing.
Product Page this Question was Asked From
Dexter Disc Brake Assembly - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 7,000 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 7000 lbs Axle
- 16 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Best Replacement Brakes for a 7,000 lbs Axle
- Q&A: Will Dexter Brake Assemblies Fit on a Lippert Axle
- Q&A: Can I Swap Out Kodiak Rotors w/ DeeMaxx Ones?
- Q&A: Can I Replace a UFP A-70 Surge Brake Actuator w/ the Replacement Inner Member for Dexter DX7.5L?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How To Determine the Correct Replacement Trailer Hub Assembly
- Q&A: Bearing Kit For Curt/Lippert 7,000 lb Trailer Axle
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer


