Is Lock Included With Replacement Endcap For AeroBlade Edge Roof Rack Crossbar

Question

Question:

Does the end cap come with the locking screw that locks it in place? Thanks

asked by: Ken

0

Expert Reply:

The # TH1500052333 package has the replacement endcap and does not include a locking screw you asked about.

If you have lock cores on the legs of your roof rack you can order a lock core. Just type THLOCK in the search box with the 4 digits you have on your key, so if you have a key with N003 on it you would type # THLOCKN003 for the replacement core.

If you are looking for the plug that fits in the hole on the replacement endcap that would be part # 8524023006.

expert reply by: Jeffrey L

0

Answer 1

The Replacement Cover #852-2382001 is the correct part for both styles of the Thule Podium foot pack so it will work for the 460 for the square crossbars or the 460R for aero-style crossbars like what you have.

view full answer...

Answer 2

I have a possible part for you, but the exact part number you sent does not have any matches. Is the Replacement Cover for TH460 Podium Foot Pack #852-2382001 what you're looking for? This is the replacement cap for Thule Rapid Podium Feet…

view full answer...

Answer 3

We carry the endcaps for Thule Aeroblade Edge Roof Rack for 2015 Honda CR-V TH7602-TH7603. For the right endcap use #TH1500052334 For the left endcap use #TH1500052333 The replacement locking plug that holds it all together is the part #8524023006.

view full answer...

Answer 4

We have the Single #8524023006 or 4-Pack #TH28VW locking plugs which will fit the Replacement Cover for TH460 Podium Foot Pack #852-2382001.

view full answer...

Answer 5

For the replacement end caps/feet on your Thule AeroBlade Edge Crossbar TH7602, you will just need #TH1500052333 for the Left and #TH1500052334 for the Right. Then for the Locking Plug you will use part #8524023006.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Is Lock Included With Replacement Endcap For AeroBlade Edge Roof Rack Crossbar

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching