Weight and Mounting Bracket Location for TorkLift PowerArmor Locking Battery Box

Question

Question:

What is the weight of this box and can it be mounted with the brackets front and back or does it have to be mounted at each side. Its the right size for the batteries but will straddle the V of my trailer tongue and not sit inside them. Im hoping to fit it on the tongue of a scamp 13foot travel trailer. Thanks.

asked by: Carlotta

0

Expert Reply:

TorkLift PowerArmor Locking Battery Box # TLA7712R weighs approximately 14 pounds with a shipping weight of 14.55 pounds. Basically, however you can mount the box will be fine as long as it is secured to the trailer. Installation may or may not require the brackets.

expert reply by: Michael H

0

Answer 1

To prevent your truck battery from draining from an auxiliary trailer battery like you plan to install when the vehicle is off you'd need to install an isolation solenoid on the 12 volt accessory circuit like with the part #PK5231201. This will…

view full answer...

Answer 2

Hey Scott! Your 2026 Ford Ranger may or may not have a brake controller port/plug, even with the tow package. There will be four wires coming out of a large wire harness by the driver side firewall, left of the brake pedal, which can be wired to the…

view full answer...

Answer 3

Hey Andrew. The Redarc Tow-Pro link will indeed work just fine for your 2026 Toyota BZ, and due to it not needing a brake output wire you do not need to hook up the brake out put wire at all. You'll plug the USCAR pig tail #20147 into the Tow-Pro…

view full answer...

Answer 4

Hi Jeff, welcome back and sorry to hear that gave you so much trouble. The Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR will work on your Silverado. This plugs in-line at the back of your 7-way at the rear of the truck. You can either…

view full answer...

Answer 5

It sure will Hans and congrats on the new Outback! The Redarc Tow-Pro Link Bluetooth Brake Controller item #RED57AR is going to work great with your 2026 Subaru Outback Wilderness. Since you have the factory tow package, all you'll need to do is…

view full answer...

Answer 6

It will Doug! It's going to be a tight fit but your Epoch Lithium Battery Model 12300AH Battery will indeed fit inside the TorkLift PowerArmor Single Locking Battery Box item #TLA7720R. The issue you're going to run into is the narrow gap at…

view full answer...

Answer 7

The holes on the bottom of the TorkLift PowerArmor Locking Battery Box #TLA7700L aren't necessarily designed for mounting the box and are really there to allow moisture to escape and as access holes for wiring. According to the instructions there…

view full answer...

Answer 8

Hey Jay, the correct replacement converter to replace what you have now that is compatible with LifePO4 batteries would be the part #PD69RR that you referenced. Progressive Dynamics likes to change their part numbers a lot and create revisions of…

view full answer...

Answer 9

Even though Lippert (LCI) does make different electric trailer jacks like parts #LC285318 and #LC643589, if you are wanting to use the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 then you need to replace your…

view full answer...

Answer 10

Hey Donald, Nope! The Bluetooth/WiFi app is free to download and free to use with the portable Watchdog Surge Protector #HU42VR. There will be a QR code on the front of the surge protector that you simply scan and it will get you all set up. I have…

view full answer...

Answer 11

The TorkLift PowerArmor Locking Battery Box for 6V and 12V Lithium Batteries #TLA7700L is designed for Lithium batteries. Lithium batteries are typically taller and more narrow so this battery box is designed to better support that size. The box…

view full answer...

Answer 12

To install the TorkLift PowerArmor Locking Battery Box #TLA7700L you'll need to use the included self-tapping screws to mount the box to your trailer tongue. You can do this either directly to your frame, using the extension brackets if they are…

view full answer...

Weight and Mounting Bracket Location for TorkLift PowerArmor Locking Battery Box

Product Page this Question was Asked From

Continue Researching