Will the Demco Mopar Rail Kit Adapter DM6099 fit with a Pullrite Superglide 2700

Question

Question:

Will the DM6099 adaptor work with Pull Rite Superglide 2700 15 K hitch? Thanks.

asked by: Al

0

Expert Reply:

Yes, the Demco 5th Wheel Rail Adapter # DM6099 will work with the Pullrite 2700 Superglide as it is designed to provide a set of industry standard rails in the bed of your 2016 Ram 3500 and that is what the Pullrite Superglide 2700 is designed to fit.

expert reply by: Jameson C

0

Answer 1

Adapters such as #DM6099 for Ram trucks with the OEM prep package and even the hitches that fit directly into the prep packages can require a little fine tuning to get the locking part at the right depth to turn the handle and lock them into place.…

view full answer...

Answer 2

Yes, we do offer the part you're inquiring about for the Demco 5th Wheel Rail Adapter part #DM6333, it's the Demco Washer Shim part #DM96GV.

view full answer...

Answer 3

If the PullRite Superglide hitch is one that was intended to fit the industry standard style of rails then yes the Demco Rail Kit adapter part #DM6099 will work with it. I attached a picture that shows a Superglide hitch installed in the rail kit for…

view full answer...

Answer 4

The fifth wheel hitch I recommend for your 2019 Ram 2500 short bed that has the OEM rail kit is the B and W Companion Slider for Ram rail kits part #BWRVK3670. This USA made hitch is widely considered by most RVers to be the best hitch you can tow a…

view full answer...

Answer 5

I attached an install video for the Furrion Vision S part #FOS43TASF installed on an RV that was not pre-wired for the Furrion system but was able to easily tap into the wiring needed due to clearance lights being very close.

view full answer...

Answer 6

I recommend the Demco Autoslide 5th Wheel Hitch #DM89GV as the best hitch for your 2023 Ram 2500 short bed. This will drop into the factory bed mounts you have without the need for an adapter. This helps to reduce a lot of the noise other hitches get…

view full answer...

Answer 7

We typically recommend that any beds in the 6-1/2' to 6-3/4' range used a sliding hitch and bed shorter than that used a fixed hitch with a rotating pin box to enable enough clearance to make a full 90 degree turn. Since you have a 2022 Ram…

view full answer...

Answer 8

The B&W Companion OEM 5th Wheel Trailer Hitch w/ Slider for Ram Towing Prep Package, #BWRVK3670 is for 5th wheel towing not goose neck connection. If you are looking for a goose neck type hitch, I suggest the Curt Ball and Safety Chain Loops Kit…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Will the Demco Mopar Rail Kit Adapter DM6099 fit with a Pullrite Superglide 2700

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching