Replacement Pin For Thule Snug Tite Hitch Lock and Anti-Rattle Device

Question

Question:

I have a Thule bike rack that needs a bolt going from the hitch from the car trough bike rack. The specs are 9029-sn1059916 purchased in 4/18/12. Could you help me? Thanks

asked by: Mike P

0

Expert Reply:

It sounds like you need the bolt for the Snug Tite Hitch Lock for your Thule bike carrier. I can help you out with that.

The threaded pin we offer is part # 853-5917. I checked out your invoice and this pin will work great with your hitch lock and anti-rattle device.

expert reply by: Jeffrey L

0

Answer 1

The Thule Snug Tite Hitch Lock #THSTL2 is threaded specifically for the Thule racks listed on its product page. This is the only locking pin offered that is for Thule racks.

view full answer...

Answer 2

If you need a replacement locking anti-rattle hitch pin for your Thule T2 2-inch platform carrier #TH916XTR you can use part #THSTL2 which is shown in the linked video and photo. This kit includes the threaded hitch pin, lock assembly with both…

view full answer...

Answer 3

Hi CT, Sadly, we don’t carry the gray knob by itself for your Yakima OnRamp XL. To replace that missing knob, you’ll need the complete Replacement Cradle and Strap for Yakima OnRamp Electric Bike Racks, part #Y27TR. I know replacing the whole cradle…

view full answer...

Answer 4

Hey John, thanks for reaching out! Replacement bike rack parts can be a bit confusing to find, but I really like delving into this stuff and I'm pretty confident you're looking for the bolt for the older Thule Vertex bike rack, which looks…

view full answer...

Answer 5

Yes, we do! The Thule Trailway bike rack is a rebranded Thule Parkway so the correct hitch bolt you would need is item #908-1240-54. Additionally, this means the Replacement Hardware Bag for Thule Hitching Post Pro and Parkway Bike Racks item…

view full answer...

Answer 6

Hi CT! Yes, you’ve got the right one. I confirmed with Yakima that the Replacement Wheel Tray Installation Knobs for Yakima OnRamp cradle part #Y62AR, are the correct replacement knobs for the Y27TR wheel cradle. I’m sorry for the confusion earlier,…

view full answer...

Answer 7

I checked with my contact at Thule and verified that the Thule replacement hitch bolt you are looking for is part #908-1240-54. It is a 12 x 40mm hex bolt with a property class of 8.8. It should be installed with M12 washer, #951-1224-54, and M12…

view full answer...

Answer 8

The Thule Snug Tite Hitch Lock and Anti-Rattle Device, part #THSTL2, will work with your Thule Trailway 992Z bike rack. It is an anti-rattle hitch pin so it will eliminate movement between your bike rack and the hitch receiver. I have attached a…

view full answer...

Answer 9

While shorter than most hitch pin bolts the Thule bolt part #908-1240-54 is the correct bolt for a Thule bike rack like the part #TH9030XT. I attached a picture that I took from the install instructions that shows how it works. You may be thinking of…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Replacement Pin For Thule Snug Tite Hitch Lock and Anti-Rattle Device

Product Page this Question was Asked From

Continue Researching