Recommended Trailer Parts For 1-1/4 Inch #TRU94FR Trailer Spindle

Updated 03/03/2016 | Published 03/02/2016

Products Featured in This Question

BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter

(71)

$33.40

Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased

(1442)

$46.45

Question:

Need to replace spindles and would like to put hubs on my trailer. Not real savvy about any of it. Looking to go to 1-1/4inch spindle and having hard time finding a 5-4.5inch hub to fit. Keeping cost as low as possible.

asked by: Shawn

Expert Reply:

If you are replacing your current spindles with the 1-1/4 inch spindle # TRU94FR, then the 5 on 4-1/2 trailer hub I recommend for your 2,000lbs trailer axle are the etrailer # AKIHUB-545-2-1K. This hub will be compatible with the L44643 bearing sizes that are needed by the # TRU94FR spindle. This will include the inner and outer bearing, as well as the grease seal, lug nuts, and cap. This is sold in a quantity of one so you will want to change your quantity to two to complete the fitment of one axle.

If you wanted to tell me the capacity of your axle or axles, then I could make sure that you are getting the right components for your trailer.

expert reply by: Jackie C