Result: bt8 spindle

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

As far as removing your current spindle, you will need to grind/drill off the old one. One the old spindle is removed, I recommend the BT8 Spindle for 2,000-lb Trailer Axles #TRU59FR (for a 1-3/8 diameter) or the #TRU94FR (for 1-1/4 diameter). The…

Based on past information and that bolt pattern you most likely have 2,000 lb axles on your 1966 Apache Eagle Tent Camper. Unfortunately, there are two possible bearing configurations for hubs that fit. There is no way to know which you need without…

The 07100 bearing number you referenced is an older bearing that has the same dimensions as #L44643. If both the inner and outer bearings on your existing trailer are the 07100/ #L44643, and the hub has a 4 on 4 inch bolt pattern, the correct…

Based on your dimensions you have a BT8 style hub so the part #AKIHUB-440-2-1K you mentioned would fit and work well. The length of your spindle matches what this is compatible with as well.

Yes, the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10140 referenced in your question will fit the same 12 inch wheel with a 4 inch width that your existing 4.80-12 size tires are mounted to. Just note that the ST145/R12 tire will be…

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

We have had a customer with your same UFP hub HD-1377 successfully use as a replacement the hub/drum #AKHD-545-35-K which works on 3500-lb axles. This hub uses inner bearing #L68149 (1.378" inner diameter) and outer bearing #L44649 (1.063"…

I will start by saying that your TDE 11033L hub uses the #L68149 inner bearing and #L44649 outer bearing, which means you have a pretty standard #84 spindle on a 3,500 pound axle. With that said, we do not carry Tie Down Engendering products, so the…

The BT8 spindle part #TRU94FR that you referenced is designed for 2,000 lb axles so for a hub that would fit this you would want the #8-259-5UC1-EZ which comes with the correct bearings installed and is pre-greased and ready to install. The weld on…

We don't a trailer tire size that fits an 8 inch wide 15 inch diameter wheel, but it's possible you are measuring the width and including the mounting lip of the wheel which adds an inch. If that is the case you'd actually have a 7 inch…

The #e84YR 2K capacity axle has a 1-3/4 inch diameter axle tube. The spring seats or perches measure 2-1/4 inches in length by 1-7/8 inches in width, as shown in the provided diagram.