Will the Hitch Pin Hole on the Curt Front Hitch part # C31069 be In Front or Behind Air Dam

Question

Question:

Will the hitch frame be hidden behind the front air dam, and will the tube stick out far enough past it to put the pin in in FRONT of the air dam?

asked by: Pat W

0

Expert Reply:

I attached a picture of how the Curt front hitch part # C31069 will look when installed on a truck like your 2014 Chevy Silverado 1500. The hitch pin hole is right behind the air damn. It is a little hard to see in the picture so I put an arrow on it to point it out.

expert reply by: Jameson C

0

click to enlarge

Steve S.

5/22/2020

I am looking for a front trailer hitch for a gmc savanna! Can you help me Thanx

Chris R.

5/25/2020

Most likely there isn't a custom front hitch available for your Savana, but if you can tell me the model year I will be happy to make sure. Your best bet might be a universal hitch like the Curt # C13702 that you could weld or bolt onto the frame.

Steve S.

5/26/2020

looking for a front trailer hitch for a 2020 savanna Thank you!

Chris R.

5/28/2020

Thanks for the info! Unfortunately tough there aren't any custom front hitches available for your Savana.

Answer 1

Hey Russell, thanks for reaching out. We do have one no-drill front hitch option for your 2018 Chevy Silverado 1500 LT, the Draw-Tite #65064. This hitch installs using access holes that are already present on the frame. You will have to trim/remove…

view full answer...

Answer 2

All of the front hitches we offer for your 2017 GMC Sierra 1500 are going to install below the front bumper. The Curt part #C31069 will have the best ground clearance as it sits the highest and the hitch opening hangs down below the crosstube of the…

view full answer...

Answer 3

The Curt Front Mount Trailer Hitch Receiver #C31069 provides the most ground clearance out of the three available for your 2017 Chevy Silverado 1500. To give you a better idea of how low each hitch would sit once bolted to your frame I have attached…

view full answer...

Answer 4

The biggest difference between the #C31012 and the #C31069 (both of which are confirmed to fit your 2018 Silverado 1500) is ground clearance. The Curt #C31069 will hang down 6-3/4 inches from the mounting surface and the #C31012 will hang down 8-3/16…

view full answer...

Answer 5

Hey Norman. The best front hitch clearance wise for your 2018 Chevy Silverado 1500 is going to be the Curt item #C31069. It hangs down only 9.52" from the bottom of your frame. The Draw-Tite item #65064 sits a little bit lower at 9.62".…

view full answer...

Answer 6

The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31012 and the Curt #C31069 are more similar than different as you stated with the same capacities and mounting location. I reached out to my contact at Curt and the difference…

view full answer...

Answer 7

I've tried every possible option I can think of to get that bike rack and adapters to allow you to tow at the same time and unfortunately there really isn't a solution that will work with a single hitch receiver compatible with your 2016…

view full answer...

Answer 8

The Curt front hitch part #C31069 that you are interested in would install in the same frame holes on your 2015 GMC Sierra 1500 as the front hitch part #C31012 that you weren't happy with. From the mounting surface to the bottom of the hitch tube…

view full answer...

Answer 9

For your 2016 Chevrolet Silverado 1500, I recommend using the Detail K2 Avalanche Snowplow part #K2AVAL8219 with the Curt Front Mount Trailer Hitch Receiver part #C31069 in order to plow your 800' long lane. The Avalanche Snowplow is 82"…

view full answer...

Answer 10

I recommend the Curt Front Mount Trailer Hitch Receiver #C31069 for your 2019 Chevrolet Silverado 1500 LD Z71 LT. This receiver does not hang as low as their other Receiver #C31012 which was made taller to fit behind the front fascia used on the…

view full answer...

Answer 11

The Draw-Tite Front Mount Trailer Hitch Receiver part #65078 is for the 2500 and 3500 models whereas you have a 1500 model which has an entirely different front end. The bolt holes for the above hitch would not line up with those on your frame and…

view full answer...

Answer 12

We have a great front mount hitch option confirmed to fit your 2016 Tahoe with the Z71 off road option, the Draw-Tite Front Mount Trailer Hitch Receiver #65064. According to the linked installation instructions, you may need to lower or loosen the…

view full answer...

Will the Hitch Pin Hole on the Curt Front Hitch part # C31069 be In Front or Behind Air Dam

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching