Replacement Drive-In Studs For Dexter Trailer Hub And Drum Assembly # 8-388-80UC3
Updated 10/20/2015 | Published 10/19/2015
Products Featured in This Question
Question:
I need replacement studs for this Dexter product: Code: 8-388-80UC3 / 42 MM Never Lube hubs. Purchased 2 of these about 45 days ago. Had a problem where the lug nuts loosened and ruined the studs. So we need 12 studs and lug nuts. Please advise with availability and pricing. Thanks
asked by: Chris K
0
Expert Reply:
The wheel stud used on part # 8-388-80UC3 is part # 7-262.
These are drive-in 1/2 inch studs that measure 2.7 inches long, and will work well for your hubs. If you need lug nuts I recommend part # CE11051.
expert reply by:
Jeffrey L
0
Product Page this Question was Asked From
Dexter Wheel Bolt - 1/2" Diameter - 2-11/16" Long - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2-11/16 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Recommended Lug Nuts For 1/2"-20 Wheel Studs
- Q&A: Enclosed Trailer Door Latch Rattles, What Tight Options To Replace It With?
- Article: Where Should the Heavy Weight Be on a Trailer?
- Q&A: Recommended Replacement Seal For A Tri Tec T-23972 Seal
- Q&A: Replacement Bronze Bushings for MoRryde CRE3000 Suspension System
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Use the Camco Olympian Grill with Disposable Propane Bottles
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Wheel Stud that is Longer Than K12WB2 with Same Diameter
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Rust Prevention