Should a Roof Mount Bike Carrier be Loaded on the Left, Middle, or Right Side of a Roof Rack

Question

Question:

Im only carrying 1 bike with the Y02103. should I mount it in the middle, drivers side, or passenger side?

asked by: Andy

0

Expert Reply:

It doesn't really matter where you mount the Yakima FrontLoader, # Y02103, on the roof of your vehicle. But consider that you will need to access the bike easily and safely. This usually translates into placing it on the passenger's side because the middle would be harder to reach and the driver's side is the street side. The passenger's side is the curb side so it is safer and easier to access than the middle.

expert reply by: Michael H

0

Answer 1

The hub setting for your Yakima Fullback #Y02633 on your 2020 Toyota RAV4 is setting #5.

view full answer...

Answer 2

Yes! The front and back parts of the Thule UpRide Roof Bike Rack #TH599000 can be easily flipped so that the bike rack can be used on either side of the vehicle. This rack comes assembled aside from the T-Bolts or clamps (depending on what type of…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 7

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Answer 8

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 9

Hello Karla, Wow, that is a really nice e-bike! I do not blame you for wanting a ramp for your e-bike, just because you can lift your bike doesn't mean that you should. For your 2024 Aventon A-Level 2 step through Commuter E-bike I recommend the…

view full answer...

Answer 10

Hello Joseph, yes there is! What you are looking for is the Anti-Rattle Hitch Lock and Cable Lock for 2" Hitch Mounted Bike Racks #e88RV. This will work with the Benton Bike Rack #B54VR, as well as the #B94FR and #B54FR so that the bike and rack…

view full answer...

Answer 11

Great question, Hannah. Both use wheel-mount systems and avoid frame contact, but the Crosstrack 1 bike 2" hitch #HLY98RR has a tilt feature and no-tool install thanks to the No-Wobble feature (uses a handle that you twist by hand). The Kuat…

view full answer...

Answer 12

Hey Mike! The Benton Shifts&Grins Bike Rack for 4 Bikes item #B82FR does not have any built in locks which is a big part of why it comes at such an affordable cost compared to other manufacturer's offerings. You can easily secure your bikes…

view full answer...