Replacement Tail Light For Bargman 6-1/2 Inch Oval Light

Updated 08/18/2015 | Published 08/16/2015

Products Featured in This Question

Optronics Trailer Tail Light - Stop, Turn, Tail - Submersible - Incandescent - Oval - Red Lens

(2627)

$5.18

3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead

(394)

$3.83

PVC Grommet for 6-1/2" Oval Trailer Tail Lights

(1003)

$3.01

Miro-Flex LED Trailer Light w/ Reflector - Brake, Tail, Turn - Submersible - Oval - Red

(432)

$23.94

Question:

Need to replace Bargman Trailer tail light. The code on lens is R-SAE STIP2 A-SAE IP2P 97 DOT. I believe Optronics ST70RB is the correct replacement part-but please confirm -also need the grommet and connector plug/wire as well

asked by: D R

Expert Reply:

The Optronics light that you referenced, part # ST70RB, is an exact replacement for Bargman light # 40-06-001. If you can find that part number on your Bargman light, then we can be sure that this light is the correct replacement. Even if your Bargman light has a different part number, # ST70RB will very likely work. The dimensions of the light are 6-1/2 inches long x 2-1/4 inches wide x 2-3/8 inches deep. If your current trailer light is approximately the same size, this light will work well for your trailer. For an LED light option, you can use # STL22RB. The code that you provided is actually the lens's rating, not the part number.

The rubber grommet for either light is part # a70gb, and the grommet measures 7-5/8 inches long x 3-3/8 inches wide x 1-1/8 inches deep. The 3-wire plug will be part # A45PB.

expert reply by: Victoria B