Replacement Hubs for a Hudson Bros. Trailer with 5-Spoke Utility Hubs
Updated 08/04/2015 | Published 08/03/2015 >
Question:
I have a Hudson Bros trailer with hubs marked 8-222. Is the 8-174 a replacement?
asked by: Mark
1
Helpful Expert Reply:
Dexter hub # 8-174-5UC3 uses the 5-spoke utility bolt pattern so it is uncommon just like the hub you have. If your existing hub uses inner bearing 25580 and outer bearing 15123 with a seal inner diameter of 2-1/8 inches then this hub is a likely fit. The bearing numbers and seal are key.
expert reply by:
Michael H
1
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / 15123
- Standard Grade
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 5 Spoke Utility
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer brakes
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Trailer Hitch
- Video: The Low-Down on the PVC Grommet for 4" Round Recessed Trailer Tail Lights
- Shop: Fifth Wheel Hitch
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Is 14 Gauge Wire Too Small for Electric Trailer Brakes
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Q&A: Recommendation For Replacing A Dayton Fayette 9222 Hub
- Q&A: Can I Replace 8-14.5 Tires with a Non-Metric Sized Tire
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Shop: PVC Grommet for 4" Round Recessed Trailer Tail Lights - Notched
- Shop: Shackle Bolt For Double-Eye Springs - 9/16" Diameter - Plain - 3" Long
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"
- Shop: Optronics Armored LED Clearance and Side Marker Light - 6 Diodes - Steel Housing - Red Lens
- Video: How to Install the Curt Trailer Hitch Receiver on a 2007 Ford F-250 and F-350 Super Duty
- Article: Trailer Lighting Requirements
- Q&A: How Much Does The TA35ZR Taskmaster Modular Wheel Weigh?
- Q&A: What Bike Rack will Allow Me to Get in the Hatch of My Prius, Hollywood Trailrider or Swagman TILT?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Hard Tonneau Covers vs Soft Tonneau Covers
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams



